Neuro & Ortho
Ball Pean Hammer
SKU:
TT-SI-5622
7-1/2" (19.0 cm) Ball Pean Hammer can be used in conjunction with other surgical equipment to cut and otherwise manipulate bone and assorted other hard tissue or when extra force is necessary in a variety of surgical scenarios. The unique design of this hammer features a rounded head on one side and a cylindrical flat head on the opposing side. Additionally this hammer is available in two sizes either an 8 oz weight or 13 oz weight with a small face diameter or large face diameter.
Bane Bone Rongeur
SKU:
TT-SI-9815
Bane Bone Rongeur is a specialized instrument made for manipulation of bone. It can be used to do tings like clip bone into smaller fragments or to chip or gnaw away at a particular areas of bone in repair of fractures or simply in increasing access to the surgical field. This instrument features jaws that are 5.0 mm wide and are curved which makes it better suited to mirror the contours of certain areas of the body.
Bayonet Love-Gruenwald Ivd Rongeur
SKU:
TT-SI-5568
3.0 mm x 10.0 mm jaws, 4-3/4" (12.1 cm)Â Bayonet Love-Gruenwald IVD Rongeur is a specialized instrument crafted for use in handling of intervertebral discs. The bayonet shaft allows for better visualization. These can be used in spinal surgeries such as discectomies that require cutting or removal of fragments of this fibrocartilagenous layer. This rongeur is available in a variety of lengths including 5", 6", 7", 9", 11" and 12" as well as with jaws that are angled up, down or straight making this suitable for any particular patient need or surgeon preference.
Bayonet Micro Kerrison Rongeur
SKU:
TT-SI-1672
undefined
Bayonet Micro Kerrison Rongeurs retain all the features of traditional Micro Kerrison models with the added benefit of a bayonet-style shaft which allows for better visualization and access by the surgeon. This style is offered both with and without an ejector pin, depending on surgical preference. Please note that website images are often representative of the product family and may not conform to the exact specifications or features of the item you select. The final specifications will match the description of the specific catalog item you select.
Bayonet Rotating Kerrison Rongeur
SKU:
TT-SI-2195
undefined Bayonet Rotating Kerrison Rongeurs feature a fully-rotatable and bayoneted instrument shaft, removable with the click of a single thumb release lever. The rotating shaft allows for a range of cutting angles, and the removable shaft is ideal for thorough decontamination and sterilization of the instrument. The bayonet shape also allows for better visualization. These shafts feature the larger bite opening typical of Spurling-Kerrison styles. Please note this is for the shaft only. Handles are sold separately.
Beckmann Laminectomy Retractor
SKU:
TT-SI-7633
hinged arms, 4x4 sharp prongs, 17.0 mm deep, 12-1/8" (31.0 cm)Beckman Laminectomy Retractor is made for use in neurosurgical procedures of the spinal cord. Specifically this retractor can be used in laminectomy procedures in which the lamina of the vertebrate is removed. This retractor can be used to push aside the muscle and soft tissue layers that lie directly above the spinal cord. The ring handles and ratcheting mechanism make it easy to operate manually and to lock into the appropriate width. Additionally this retractor has sharp prongs and hinged arms to keep a firm grip on the tissue it is retracting.
Beckmann-Adson Laminectomy Retractor
SKU:
TT-SI-9236
hinged arms, 4x4 prongs, 12-1/8" (31.0 cm)Beckmann-Adson Laminectomy Retractor is a specialized instrument made for use in neurosurgical procedures, specifically those pertaining to the spine. This retractor has a long and slim design and features hinged arms from which 4x4 prongs extend. During laminectomy these prongs can be used to retract soft tissue and muscle layers form directly above the vertebral lamina and the ratcheting mechanism can hold the soft tissue out of way. Additionally this instrument is available in two widths 25.0 mm and 44.0 mm as well as in either sharp or blunt to accommodate a variety of surgical approaches.
Beckmann-Eaton Laminectomy Retractor
SKU:
TT-SI-7592
hinged arms, 7x7 prongs, 12-1/2" (32.0 cm)Â Beckmann-Eaton Laminectomy Retractor is designed for use in neurosurgical laminectomy procedures. In order to perform this procedure the soft tissue and muscle layer directly atop of the spinal need to be incised through and retracted. This instrument features hinged arms and 7x7 prongs that allow gentle but effective retraction that gives direct access to the surgical field. This retractor is available either with either sharp or blunt prongs making it a versatile instrument to satisfy any patient need or surgeon preference.
Beeson Plaster Spreader
SKU:
TT-SI-3315
11-3/4" (30.0 cm)Â Beeson Plaster Spreader is crafted for use in removal of plaster casts after the healing process or to check how a fracture site is healing over time. Specialized equipment is necessary for handling plaster because it can otherwise dull inappropriate tools. This spreader is 11.75" long and features slightly beveled jaws that makes it able to slip slightly under the plaster to give it a proper angle for effective separation.
Bennett Bone Retractor
SKU:
TT-SI-5482
9-1/2" (24.1 cm)Â Bennett Bone Retractor is designed for use in retraction of bone during surgical intervention. It features a large handle that features a rounded tip for ease in handling. Additionally the functional portion of this instrument has a flat neck that is at a slight angle and flares out and makes a distinctive leaf shape that is also rounded at its tip. The head of this piece is available in two widths 45.0 mm and 65.0 mm making it versatile enough for small and large bones.
Bergmann (Hibbs) Mallet
SKU:
TT-SI-7418
solid stainless steel, 1-1/4" lb., 1-1/2" head, 9" (23.0 cm)Bergmann Mallet which is also commonly referred to as a Hibbs mallet and is used to apply added force to osteotomes, chisels or gouges. This mallet features a handle with micro-serrations which make it easier to grip and handle when swinging. The head is formed of solid stainless steel that resists deformation when used to strike things and is cylindrical with each end featuring a widened disc shape increasing the surface area for contact.
Berry Sternal Needle Holder & Wire Twister
SKU:
TT-SI-3966
tungsten carbide inserts, heavy pattern, 6.0 mm jaws, 7-3/4" (19.5 cm)Â Berry Sternal Needle Holder & Wire Twister is a highly versatile instrument that is useful in a vast array of surgical settings. Not only does it serve as a needle holder to aid in suturing during and at the close of surgery but it has other uses as well. The same ability to grip that makes it ideal for use in needle manipulation also makes it ideally suited for twisting wire. Many procedures require the placement of a wire to hold something together or to give some temporary stability while the body heals.