Neuro & Ortho
Adson Aneurysm Needle
SKU:
TT-SI-3689
9" (23.0 cm)Â Adson Aneurysm Needle is an instrument crafted for use in a variety of different procedures. Specifically it is long thin, probe type instrument that features a slight curvature at the end. Additionally it features a blunt-point with an eye that allows for ligatures to be passed behind aneuryms or vessels in surgery. The specialize design of this needle prevents tearing or trauma to the aneurysm as the needle is passed by it to prevent any further bleeding.
Adson Cerebellar Retractor
SKU:
TT-SI-3676
7-1/2" (19.0 cm), 22.0 mm deep Adson Cerebellar Retractor is a specialized instrument that is used in neurosurgical procedures. This tool can be used for retraction of the cerebellum, it is protected from damage by placement of cotton strips. There is a ratcheting mechanism that allows the ring handles to be locked at a certain width and held there. Additionally this retractor is available with either straight or angled arms and either sharp or blunt prongs makes this a highly versatile instrument that can satisfy any particular surgeon preference of patient need.
Adson Cranial Rongeur
SKU:
TT-SI-6624
Adson Cranial Rongeur is ideally suited for use in neurosurgical procedures. This instrument features a 8.0 mm wide jaw that makes it suitable for grasping bony tissue or other dense tissue areas such as cartilidge. This rongeur is particularly well suited for procedures such as craniotomies that require increased access to brain tissue through the cranial bone or other cranial procedures. Additionally this ronger is available in three different profiles: straight, curved or rat tooth making it suitable for use in a variety of surgical scenarios and surgeon preferences.
Adson Drill Guide
SKU:
TT-SI-4234
Adson Drill Guide
Adson Drill Guide is an instrument designed for use in conjunction with a mechanical drill. It features ring handles which makes it easy to handle and manipulate manually. The strong stainless steel design allows for it to withstand the pressure and force of a drill and maintain it function as a guide to ensure the trajectory of the drill follows that which the surgeon intends.
Adson Dura & Nerve Hook
SKU:
TT-SI-6258
3.0 mm tip, 8" (20.0 cm)Â Adson Dura & Nerve Hook is crafted for use in a wide variety or neurosurgical procedures. This hook is a multipurpose instrument that can be used to retract nerves but can also be used to retract the dural layer of the meninges during craniotomies and spinal surgeries. Additionally this instrument is available with either a sharp or blunt tip making it suited for retraction of very delicate tissue matter with the blunt tip or less sensitive tissue with the sharp tip.
Adson Laminectomy Retractor
SKU:
TT-SI-7587
hinged arms, 4x5 blunt prongs, 1-1/8" (2.80 cm), 12-1/8" (31.0 cm)Adson Laminectomy Retractor is ideally suited for use in retraction of muscle and soft tissue layers during laminectomy procedures. This procedure removes the lamina, a portion of the vertebrae, and it is necessary to have full access to the vertebrae in question. This retractor features ring handles for ease in handling as well as hinged arms and blunt prongs that provide a gentle but secure hold on the tissue.
Adson Sharp Knife
SKU:
TT-SI-5989
hollow handle, 8" (20.0 cm)Â Adson Sharp Knife can be used in a variety of surgical procedures that require quick and effective cutting. Specifically procedures of the brain or spinal cord and nerves are suitable for cutting with this knife. The more precise the initial incision the less trauma to surrounding tissue and quicker the healing process. Additionally this instrument features a hollow handle which makes it lighter and easier to handle manually and superior to other similar instruments in procedures such as cordotomies.
Alexander Chisel
SKU:
TT-SI-4828
straight, 7" (18.0 cm)Â Alexander Chisel is crafted for use in surgical procedures that require cutting, scraping and reshaping of bone. This chisel features a long shaft and on one end features a blunt, flat end for hammering while the other a sharpened blade style end. The lack of a designed handle area increases the versatile of this instrument because it can be gripped in any way that makes the surgical maneuver the most effective. This chisel is available in six different sizes in 2.0 mm increments from 4.0 mm to 14.0 mm making it well suited for small and large tasks.
Alexander Gouge
SKU:
TT-SI-1391
7" (18.0 cm)Â Alexander Gouge is specially designed for use in procedures that require manipulating of bone via scooping or removal of particular portions. This gouge features a long slim handle portion that transitions to the gouge blade. This instrument is designed for chisels but more specifically instead of a flat edge it features a rounded edge that allows it to be used to create holes or to scoop out segments of bone.
Aufranc Cobra Retractor
SKU:
TT-SI-1492
10.0 mm tip, 10-1/2" (26.5 cm)Aufranc Cobra Retractor is a uniquely designed instrument for use in retraction and elevation of spinal roots. This retractor can be used in many different neurosurgical procedures but is especially useful in spinal surgeries. It features a cobra shaped head which gives it a contour well suited for maneuvering in the vicinity of nerve roots and keeping them protected. Additionally this retractor is available in four different tips making it well suited for any procedure: serrated pointed tip, smooth pointed tip, serrated blunt tip, smooth blunt tip.
Bacon Cranial Rongeur
SKU:
TT-SI-6921
Cranial Rongeur is a unique instrument crafted for use in neurosurgical procedures that require access to the brain tissue or other areas associated with it. This instrument can be used to chip away or create a window in the skull to create increased access so the surgical field. These rongeurs feature a 2.0 mm jaw width and are set at a slight angle that allows the handles to remain comfortable out of the surgical field and able to manipulate easily.
Bailey Gigli Saw Guide
SKU:
TT-SI-4126
13" (33.0 cm)Â Gigli Saw Guide is an instrument specifically designed for use alongside a Gigli saw which is preferred in amputation procedures. The Gigli saw is flexible and thus needs a guide to keep it aligned to the area where the incision and cutting is taking place. This instrument is ideally used in amputation procedures in which a smooth and consistent cutting motion is required. Additionally this guide is 13" long.
Ball Pean Hammer
SKU:
TT-SI-5622
7-1/2" (19.0 cm) Ball Pean Hammer can be used in conjunction with other surgical equipment to cut and otherwise manipulate bone and assorted other hard tissue or when extra force is necessary in a variety of surgical scenarios. The unique design of this hammer features a rounded head on one side and a cylindrical flat head on the opposing side. Additionally this hammer is available in two sizes either an 8 oz weight or 13 oz weight with a small face diameter or large face diameter.
Bane Bone Rongeur
SKU:
TT-SI-9815
Bane Bone Rongeur is a specialized instrument made for manipulation of bone. It can be used to do tings like clip bone into smaller fragments or to chip or gnaw away at a particular areas of bone in repair of fractures or simply in increasing access to the surgical field. This instrument features jaws that are 5.0 mm wide and are curved which makes it better suited to mirror the contours of certain areas of the body.
Bayonet Love-Gruenwald Ivd Rongeur
SKU:
TT-SI-5568
3.0 mm x 10.0 mm jaws, 4-3/4" (12.1 cm)Â Bayonet Love-Gruenwald IVD Rongeur is a specialized instrument crafted for use in handling of intervertebral discs. The bayonet shaft allows for better visualization. These can be used in spinal surgeries such as discectomies that require cutting or removal of fragments of this fibrocartilagenous layer. This rongeur is available in a variety of lengths including 5", 6", 7", 9", 11" and 12" as well as with jaws that are angled up, down or straight making this suitable for any particular patient need or surgeon preference.
Bayonet Micro Kerrison Rongeur
SKU:
TT-SI-1672
undefined
Bayonet Micro Kerrison Rongeurs retain all the features of traditional Micro Kerrison models with the added benefit of a bayonet-style shaft which allows for better visualization and access by the surgeon. This style is offered both with and without an ejector pin, depending on surgical preference. Please note that website images are often representative of the product family and may not conform to the exact specifications or features of the item you select. The final specifications will match the description of the specific catalog item you select.
Bayonet Rotating Kerrison Rongeur
SKU:
TT-SI-2195
undefined Bayonet Rotating Kerrison Rongeurs feature a fully-rotatable and bayoneted instrument shaft, removable with the click of a single thumb release lever. The rotating shaft allows for a range of cutting angles, and the removable shaft is ideal for thorough decontamination and sterilization of the instrument. The bayonet shape also allows for better visualization. These shafts feature the larger bite opening typical of Spurling-Kerrison styles. Please note this is for the shaft only. Handles are sold separately.
Beckmann Laminectomy Retractor
SKU:
TT-SI-7633
hinged arms, 4x4 sharp prongs, 17.0 mm deep, 12-1/8" (31.0 cm)Beckman Laminectomy Retractor is made for use in neurosurgical procedures of the spinal cord. Specifically this retractor can be used in laminectomy procedures in which the lamina of the vertebrate is removed. This retractor can be used to push aside the muscle and soft tissue layers that lie directly above the spinal cord. The ring handles and ratcheting mechanism make it easy to operate manually and to lock into the appropriate width. Additionally this retractor has sharp prongs and hinged arms to keep a firm grip on the tissue it is retracting.
Beckmann-Adson Laminectomy Retractor
SKU:
TT-SI-9236
hinged arms, 4x4 prongs, 12-1/8" (31.0 cm)Beckmann-Adson Laminectomy Retractor is a specialized instrument made for use in neurosurgical procedures, specifically those pertaining to the spine. This retractor has a long and slim design and features hinged arms from which 4x4 prongs extend. During laminectomy these prongs can be used to retract soft tissue and muscle layers form directly above the vertebral lamina and the ratcheting mechanism can hold the soft tissue out of way. Additionally this instrument is available in two widths 25.0 mm and 44.0 mm as well as in either sharp or blunt to accommodate a variety of surgical approaches.
Beckmann-Eaton Laminectomy Retractor
SKU:
TT-SI-7592
hinged arms, 7x7 prongs, 12-1/2" (32.0 cm)Â Beckmann-Eaton Laminectomy Retractor is designed for use in neurosurgical laminectomy procedures. In order to perform this procedure the soft tissue and muscle layer directly atop of the spinal need to be incised through and retracted. This instrument features hinged arms and 7x7 prongs that allow gentle but effective retraction that gives direct access to the surgical field. This retractor is available either with either sharp or blunt prongs making it a versatile instrument to satisfy any patient need or surgeon preference.
Beeson Plaster Spreader
SKU:
TT-SI-3315
11-3/4" (30.0 cm)Â Beeson Plaster Spreader is crafted for use in removal of plaster casts after the healing process or to check how a fracture site is healing over time. Specialized equipment is necessary for handling plaster because it can otherwise dull inappropriate tools. This spreader is 11.75" long and features slightly beveled jaws that makes it able to slip slightly under the plaster to give it a proper angle for effective separation.
Bennett Bone Retractor
SKU:
TT-SI-5482
9-1/2" (24.1 cm)Â Bennett Bone Retractor is designed for use in retraction of bone during surgical intervention. It features a large handle that features a rounded tip for ease in handling. Additionally the functional portion of this instrument has a flat neck that is at a slight angle and flares out and makes a distinctive leaf shape that is also rounded at its tip. The head of this piece is available in two widths 45.0 mm and 65.0 mm making it versatile enough for small and large bones.
Bergmann (Hibbs) Mallet
SKU:
TT-SI-7418
solid stainless steel, 1-1/4" lb., 1-1/2" head, 9" (23.0 cm)Bergmann Mallet which is also commonly referred to as a Hibbs mallet and is used to apply added force to osteotomes, chisels or gouges. This mallet features a handle with micro-serrations which make it easier to grip and handle when swinging. The head is formed of solid stainless steel that resists deformation when used to strike things and is cylindrical with each end featuring a widened disc shape increasing the surface area for contact.
Berry Sternal Needle Holder & Wire Twister
SKU:
TT-SI-3966
tungsten carbide inserts, heavy pattern, 6.0 mm jaws, 7-3/4" (19.5 cm)Â Berry Sternal Needle Holder & Wire Twister is a highly versatile instrument that is useful in a vast array of surgical settings. Not only does it serve as a needle holder to aid in suturing during and at the close of surgery but it has other uses as well. The same ability to grip that makes it ideal for use in needle manipulation also makes it ideally suited for twisting wire. Many procedures require the placement of a wire to hold something together or to give some temporary stability while the body heals.