Name | Universal Ring Retractor St. Marks Blade |
Lead Time | 0-10 days |
Specialty | General Instruments-Hooks & Retractors – Universal Ring Retractor System |
Material Finish | Stainless Steel |
Grade | Premium Operating Room |
Units of Measurement | Each |
Manufacturer | Tool Tectra |
Sterility | Non-Sterile |
Usage | Reusable |
Universal Ring Retractor
w/ lip, 2-1/3″ x 7″ (5.9 cm x 17.8 cm)
Universal Ring Retractor St. Marks Blade is a long 7″ flat blade that is curved at a right-angle and contains a lip on the edge. This handle of this blade is designed to be used with a ring retractor system along with numerous other retractors to keep the edges of a wound open. This blade is particularly useful to hold open deeper incisions, such as ones in deep pelvic surgery, due to its long length and depth.
SKU:
TT-SI-4421
Category: Hooks & Retractors
Description
Reviews (0)
Be the first to review “Universal Ring Retractor” Cancel reply
Shipping & Delivery
Related products
Abdominal Retractor W/ Fixed Side Blades – 2 1/2″ Deep
SKU:
TT-SI-2532
w/ fixed fenestrated side blades, 2-1/2" deep & center blade #2470-72 (3" x 2")
Balfour Abdominal Retractor with Fixed Side Blades incorporates 2 ½" deep fenestrated side blades that are attached onto the center blade, which is 3" wide x 2" deep. Two different sizes of this retractor are offered according to the maximum spread they provide. The side blades of this particular retractor can be pushed and held away from each other to open up an incision in the abdominal cavity.
Cottle Tenaculum
SKU:
TT-SI-4115
Cottle Tenaculum
angled, 6-1/4" (16.0 cm)
Cottle Tenaculum has a long, slim handle with a hook that tapers into an angled point. The primary use of this hook is to grasp or hold tissue away from the surgical site in order to provide the surgeon with greater visibility to the area. This instrument is offered in a 6 ¼" length.
Balfour-Baby Pediatric Abdominal Retractor
SKU:
TT-SI-9243
Balfour-Baby Pediatric Abdominal Retractor
Balfour-Baby Pediatric Abdominal Retractor has a maximum spread of 3 ½," which is ideal for smaller patients, such as young children. This retractor system also includes fixed fenestrated side blades that help to spread open an incision and allow for adequate inspection of the abdominal cavity.
Cushing Vein Retractor
SKU:
TT-SI-2523
Cushing Vein Retractor
Cushing Vein Retractor has a sharply curved blade and is a popular retractor used during neurosurgery or as rib spreaders. In this way, the ribs or the tissues that are held can be pulled and kept away from the surgical area. Depending on the situation, this instrument is available in different lengths and widths.
Davis Brain Spatula
SKU:
TT-SI-9849
Davis Brain Spatula
malleable, 7" (17.5 cm)
Davis Brain Spatula is 7" in length and comes in a variety of widths to accommodate different cases. This instrument is commonly used in neurology procedures to hold the opening in the brain while operating. The spatula is also malleable, which allows it to bend and fit the size or depth of the operated brain. Following the conclusion of the surgery, a small hammer is used to strike the spatula in order to restore it to its initial shape.
Cope Retractor
SKU:
TT-SI-6923
Double-ended, 6.0 mm & 11.0 mm, 7-1/8" (18.0 cm)
Cope Retractor is a double-ended surgical instrument primarily used to pull back skin or organs that may obstruct the operating area. The main features of this retractor are its different shaped blades. For example, one end contains a strongly curved blade with a lip. The other end, however, contains a sharp, right angle blade with a ridge on the tip.
Balfour Fourth Blade Attachment
SKU:
TT-SI-1568
Balfour Fourth Blade Attachment
for detachable balfour retractor systems
Balfour Fourth Blade Attachment is especially designed to be used as an addition to the Detachable Balfour Retractor Systems. The long, flat blade can accommodate to different spread sizes to fit the needs of the procedure being conducted. It also contains an option for the right arm or left arm depending on the area of the abdominal wall that needs to be retracted.
Davis Retractor
SKU:
TT-SI-8192
Double-ended, 5.0 mm x 16.0 mm & 8.0 mm x 21.0 mm blades, 5-1/2" (14.0 cm)
Davis Retractor is a stainless steel instrument that is double-ended and has opposing blades on either end. This retractor is able to divide and keep edges of an incision open. This instrument is also protected by the Tool Tectra manufacturer warranty on defects in materials and workmanship.
Reviews
There are no reviews yet.