Name | Spring Retractor – 3X3 Prongs |
Lead Time | 0-3 days |
Specialty | General Instruments-Hooks & Retractors – Spring Retractors |
Material Finish | Stainless Steel |
Grade | Premium Operating Room |
Units of Measurement | Each |
Manufacturer | Tool Tectra |
Sterility | Non-Sterile |
Usage | Reusable |
Spring Retractor – 3X3 Prongs
Spring Retractor – 3X3 Prongs
3×3 sharp prongs
Spring Retractor is designed to produce a more even distribution when force is applied in situations that require a wound to be held open on both sides. As a result, there is less damage to tissues due to the 3×3 sharp prongs at the ends that contain a larger surface area. To suit different scenarios, this retractor is offered in different lengths.
SKU:
TT-SI-1784
Category: Hooks & Retractors
Description
Reviews (0)
Be the first to review “Spring Retractor – 3X3 Prongs” Cancel reply
Shipping & Delivery
Related products
Balfour Abdominal Retractor W/ Fixed Side Blades – 4″ Deep
SKU:
TT-SI-5534
w/ fixed fenestrated side blades, 4" deep & center blade #2470-73 (3-3/8" x 2-1/2")
Balfour Abdominal Retractor with Fixed Side Blades contains fenestrated side blades that are fixed onto the instrument. This retractor is primarily used during surgeries in which large abdominal incisions need to be held open to provide more visibility to the surgeon. Moreover, the instrument is offered in different sized spreads to accommodate different patients.
Cushing Vein Retractor – Fenestrated Handle
SKU:
TT-SI-7937
Cushing Vein Retractor - Fenestrated Handle
fenestrated handle
Cushing Vein Retractor is a more light-weight instrument due to its fenestrated handle. The lengths can range from 9" to 16." This vein retractor can be used during general surgeries to retract veins or other small tissues. It may also be used in other medical procedures such as neurosurgery to pull back tissue.
Balfour Extra-Deep Center Blades
SKU:
TT-SI-9651
For balfour retractor systems w/ fixed side blades, 2-3/4" wide x 4" deep
Balfour Extra-Deep Center Blades consists of a 4" deep blade that is curved at a right-angle. This blade may be intended for larger patients or for accessing deeper areas of the abdominal cavity so that they can be held in place. Another feature of this center blade is that it contains loop holes in the center slot so that it can provide different spreads.
Davis Retractor
SKU:
TT-SI-8192
Double-ended, 5.0 mm x 16.0 mm & 8.0 mm x 21.0 mm blades, 5-1/2" (14.0 cm)
Davis Retractor is a stainless steel instrument that is double-ended and has opposing blades on either end. This retractor is able to divide and keep edges of an incision open. This instrument is also protected by the Tool Tectra manufacturer warranty on defects in materials and workmanship.
Deaver Retractor – Flat Handle
SKU:
TT-SI-4623
Deaver Retractor - Flat Handle
flat handle, flexible
Deaver Retractor with a flat handle contains a flexible curved blade that is offered in two different widths and lengths depending on the surgical requirements. During general operations, specifically the involvement of the abdominal or chest cavity, this retractor can allow the surgeon to move one side of the incision to access the area that needs attention. If a deeper section needs to be accessed, the longer and wider blade may be more beneficial.
Cottle Tenaculum
SKU:
TT-SI-4115
Cottle Tenaculum
angled, 6-1/4" (16.0 cm)
Cottle Tenaculum has a long, slim handle with a hook that tapers into an angled point. The primary use of this hook is to grasp or hold tissue away from the surgical site in order to provide the surgeon with greater visibility to the area. This instrument is offered in a 6 ¼" length.
Davis Brain Spatula
SKU:
TT-SI-9849
Davis Brain Spatula
malleable, 7" (17.5 cm)
Davis Brain Spatula is 7" in length and comes in a variety of widths to accommodate different cases. This instrument is commonly used in neurology procedures to hold the opening in the brain while operating. The spatula is also malleable, which allows it to bend and fit the size or depth of the operated brain. Following the conclusion of the surgery, a small hammer is used to strike the spatula in order to restore it to its initial shape.
Crile Retractor
SKU:
TT-SI-6848
Crile Retractor
double-ended, 3.0 mm x 11.0 mm & 6.0 mm x 20.0 mm blades, 4-1/2" (11.4 cm)
Crile Retractor is a hand-held instrument that can hold back tissue or organs so that the surgical site can be accessed. This retractor has a wide body and right-angle blades on each end to maintain the desired position once inserted around the edges of an incision. It is offered in a 4 ½" length, which is idea for smaller openings.
Reviews
There are no reviews yet.