| Name | Screw Driver |
| Lead Time | Lead time advised within 48 hours of order placement. |
| Competitor | ;FF906;FF906R;S0106;S-0106;R6396;575109;57-5109;732590;73-2590;5751-09; |
| Specialty | Neuro, Ortho & Spine-Anterior Cervical Fusion Instruments |
| Material Finish | Stainless Steel/Plastic |
| Grade | Premium Operating Room |
| Units of Measurement | Each |
| Manufacturer | Tool Tectra |
| Sterility | Non-Sterile |
| Usage | Reusable |
Screw Driver
Screw Driver
8″ (20.0 cm)
Screw Drive is a multi-purpose instrument that can be used widely in a number of different surgical procedures. It features a smooth handle from which extends a narrower neck. This instrument measures 9″ and is formed from German operating room grade stainless steel which makes it a long lasting and reliable instrument with unparalleled longevity
Description
Reviews (0)
Shipping & Delivery
Related products
Bone Clamp
SKU:
TT-SI-5975
Bone Clamp
curved, extra long ratchet, 5-3/4" (14.5 cm)
Bone Clamp is a versatile surgical instrument that can be used in a vast array of surgeries. It can be used in seismoidectomy procedures to grasp the small sesamoid bone or it can be used in simple grasping of long bones to aid in alignment. It features curve blades that allow it to dip into the surgical field while allowing the handle of the instrument to remain out of the surgical field. Additionally this clamp features an extra long ratchet that further increases its versatile and widths it can be set at.
Bone Reduction Forceps
SKU:
TT-SI-9527
Bone Reduction Forceps - Curved Jaws, Speed Lock
curved jaws, speed lock
Bone Reduction Forceps are specially designed for use in surgeries that require manipulation of bone. Specifically these forceps features a curved jaw with some serrations that make it well suited for use in gripping bone. They can aid in approximation of bones in setting and alignment of fractures as well as any other manipulation of bone that require a firm grasp and hold. Additionally these forceps have a speed lock and is available in either 7" or 9" to satisfy any particular patient need or surgeon preference.
Depth Gauge
SKU:
TT-SI-6673
Depth Gauge Depth Gauge is designed for use in a variety of situations, specifically those in which holes are drilled into bone. This gauge can be used to measure the depth of holes that have been drilled such a initial pilot holes or burr holes in surgeries such as craniotomies. This instrument can be used to precisely make holes that are the specific depth that is needed to expose the surgical field without causing undue damage to the surrounding area. This gauge is available in two sizes: small at 13.0 cm and large at 21.3 cm making it suitable for a variety of different surgical scenarios.
Cervical Vertebral Body Multi Level Distractor elongated toothed bar
SKU:
TT-SI-7975
Cervical Vertebral Body Multi Level Distractor
elongated toothed bar Caspar Cervical Vertebral Distractor Drill Guide is crafted for use alongside the Casper Cervical Vertebral Distractor. Some spinal procedures also require the use of a drill and this guide can be used in conjunction with them to ensure the drill follows the trajectory intended by the surgeon. Additionally the use of a guide helps to protect surrounding tissue areas from the trauma that can be inflicted by a high powered tool like a drill. This instrument is available in either a left or right design making it suitable for a variety of specific purposes.
Bone Holding Forceps
SKU:
TT-SI-7557
Bone Holding Forceps
delicate, straight, 2x2 teeth, 5.0 mm wide, 7-7/8" (20.0 cm)
Bone Holding Forceps are a general purpose instrument that can be used in many different surgical procedures that require manipulation of bone. These forceps are specifically designed for use in handling delicate bones such as smaller phalangeal and metacarpal bones that require a small circumference tool. Additionally it features 2x2 teeth that allow it to effectively grip the bone without causing puncture to the bone itself.
Bone Graft Holder (Caspar Type)
SKU:
TT-SI-8815
8.0 mm x 15.0 mm tip, 21.0 cm
Capsar Type Bone Graft Holder is ideally suited for use in orthopedic type procedures that require the use of a bone graft. This instrument is made to hold and handle the bone graft until it is inserted into the area where it is necessary and secured into place. This holder features a large rounded handle from which extends a body that ends in a mechanism for grasping the bone graft. This instrument features a 8.0 mm x 15.0 mm tip
Bone Awl
SKU:
TT-SI-5459
Bone Awl
5-1/2" (14.0 cm)
Bone Awl can have a wide array of applications in orthopedic and neurosurgical procedures. Generally speaking it is used to create or enlarge holes in bone. Specifically it is ideally used to create pilot holes in vertebrae during spinal surgeries. It can be used in bone grafting procedures where the bone needs to be prodded to assess its condition. This awl features a large teardrop shaped handle that makes it easy to handle manually and maintain a firm grip to increase accuracy.
Bone Graft Impactor (Caspar Type)
SKU:
TT-SI-2524
Bone Graft Impactor (Caspar Type)
graduated 1/4" to 1-1/4", shaft 6-1/4" (16.0 cm)Bone Graft Impactor is of the Casper type and is a multi-purpose instrument that can be used in a variety of orthopedic procedures. Specifically it is designed for use in bone grafting procedures to ensure that the graft is properly settled into place. It features a handle from which the tapering body extends ending in a small circular head perfect for setting on the graft and applying force. This instrument is graduated ¼" to 1 ¼" and features a shaft of 6 ¼". This instrument is available in three sizes 3.0 mm, 5.0 mm and 8.0 mm.
Reviews
There are no reviews yet.