Pin Cutter – Side Cutting, Tungsten Carbide

tungsten carbide jaws, w/ coil spring, maximum capacity 1/16" (1.7mm), 6" (15.0 cm) End Cutter is a unique instrument designed for cutting of surgical pins or wire. Many orthopedic and neurosurgical spinal procedures require the use of such stabilization accessories to prevent trauma during recovery and confer additionally stability. This instrument is particularly well suited for end cutting which allows it to be made flush with the edge of bone or other tissue areas where it is being used. Additionally this end cutter features tungsten carbide jaws and has a maximum capacity of 1/16".

tungsten carbide jaws, cuts up to 0.047" (1.1 mm) diameter hard wire, 6" (15.2 cm) K-Wire Side Cutter is a versatile instrument that can be used in a variety of surgical procedures. It is specifically designed for use in cutting wire in a particular perpendicular orientation. The unique design of this instrument allows it to comfortably be set flush against the areas where the wire has been inserted and clip it at a length that makes it the best fit. A variety of spinal procedures require for the placement of wire through the newly grafted area to give additional support throughout recovery and this instrument can be used in manipulation and cutting of these wires. Additionally this instrument features tungsten carbide jaws and can cut wires up to a diameter of 1.1 mm.

slender jaws, 2.0 mm tip, 6" (15.2 cm) Flat Nose Pliers and Cutter is a multi-functional instrument that can be used as a pliers to manipulate the wire but also as a cutter to trim it to the appropriate length. This combination instrument also features a tapered jaw that allows it to access some areas that are more difficult to get to. Additionally, the flat nose prevents any trauma to surrounding tissue areas.

end cutting, max cutting capacity 1/16" (1.7 mm), 7-1/2" (19.0 cm) Cannulated Pin Cutter is a specialized instrument ideally suited or use in procedures of fracture repair or other procedures where a graft is set with a pin. The unique design of this cutter allows for effective end cutting. The entire head portion of the pin can be inserted into the cutter and clipped flush and the remaining clipped portion remains held in the cutter to be removed. The maximum cutting capacity of this pin cutter is 1.7 mm.