Name | McCulloch Osteotome |
Lead Time | Lead time advised within 48 hours of order placement. |
Competitor | ;NL9705001;NL9705-001;575764;57-5764;5757-64;NL9705002;NL9705-002;575765;57-5765;5757-65;5757-64_5757-65; |
Specialty | Neuro, Ortho & Spine-Mcculloch-Pattern Instruments |
Material Finish | Stainless Steel |
Grade | Premium Operating Room |
Units of Measurement | Each |
Manufacturer | Tool Tectra |
Sterility | Non-Sterile |
Usage | Reusable |
McCulloch Osteotome
8-1/2″ (22.0 cm)Â McCulloch Osteotome is an instrument very similar to a bone chisel. This osteotome can be used in many different neurosurgical and orthopedic type surgical interventions that require manipulation of bone. It features a slim handle and a further flattened body that ends in a chisel type point that allows for scooping or scraping of the bone for a variety of reasons including increasing access and visualization to the surgical field. Additionally this osteotome is available in either 4.0 mm width or 6.0 mm width making it suitable for a vast array of surgical procedures.
SKU:
TT-SI-3782
Category: Osteotomes Chisels & Gouges
Description
Reviews (0)
Be the first to review “McCulloch Osteotome” Cancel reply
Shipping & Delivery
Related products
Alexander Chisel
SKU:
TT-SI-4828
straight, 7" (18.0 cm)Â Alexander Chisel is crafted for use in surgical procedures that require cutting, scraping and reshaping of bone. This chisel features a long shaft and on one end features a blunt, flat end for hammering while the other a sharpened blade style end. The lack of a designed handle area increases the versatile of this instrument because it can be gripped in any way that makes the surgical maneuver the most effective. This chisel is available in six different sizes in 2.0 mm increments from 4.0 mm to 14.0 mm making it well suited for small and large tasks.
Hibbs Osteotome
SKU:
TT-SI-9678
9-1/2" (24.0 cm)Â Hibbs Osteotome is made for use in neurosurgical procedures that require scraping or chiseling through bone. This osteotome features a thick handle for ease in gripping and maneuverability. The handle narrows into a slim neck which widens out again into a chisel type blade. Additionally the blade features a slight curvature increasing its ability to be used to strip or scrape away layers of bone and tissue. This instrument is available in ten sizes ranging from 6.0 mm to 38.0 mm and in either a curved or straight profile allowing it to be useful in a variety of patient scenarios and surgeon preferences.
Alexander Gouge
SKU:
TT-SI-1391
7" (18.0 cm)Â Alexander Gouge is specially designed for use in procedures that require manipulating of bone via scooping or removal of particular portions. This gouge features a long slim handle portion that transitions to the gouge blade. This instrument is designed for chisels but more specifically instead of a flat edge it features a rounded edge that allows it to be used to create holes or to scoop out segments of bone.
Dawson-Yuhl Gouge
SKU:
TT-SI-3471
7.0 mm, 11" (28.0 cm)Â Dawson- Yuhl Gouge is specially crafted for delicate work in bone manipulation. It features a 7 mm gouge that can be used to scrape along bone or with a mallet be used to create holes or splinter bone to gain access to the inside. Uniquely this instrument is available in two different styles, straight or bayonet, allowing the perfect fit for any particular surgical maneuver.
Mini-Lambotte Osteotome
SKU:
TT-SI-9143
swiss pattern, 5-1/8" (13.0 cm)Â Mini-Lambotte Osteotome is an instrument designed for use in cutting bone. This osteotome is crafted with a Swiss pattern. Osteotome offer significant advantages over drilling because they do not generate heat which can be damaging and also offer an increased level of tactile sensation. This instrument is available in a straight profile at twelve different lengths from 2.0 mm to 24.0 mm in 2 mm increments or in a set of nine. This instrument is also available in a curved profile in seven different lengths from 2.0 to 14.0 mm in 2 mm increments.
Cobb Spinal Gouge
SKU:
TT-SI-7235
hexagonal handle, 9-1/2" (24.1 cm)Â Cobb Spinal Gouge is a specially crafted instrument for use in spinal surgeries. This instrument features a solidly designed hexagonal handle which gives adequate area for gripping. The gouge is designed to be used in the close spaces of the vertebral canal and other areas encountered in spinal surgery to make holes or to scrape away at bone. It is available in four different styles: straight, medium curve, strong curve and reverse curve making it well suited for a vast array of surgical scenarios and satisfy any surgeon preference.
Hibbs Gouge
SKU:
TT-SI-4369
9-1/2" (24.0 cm)Â Hibbs Gouge is uniquely suited for use in surgical procedures that require splitting or scraping bone. This gouge features a strong and sturdy handle for a secure and strong grip to reduce slippage when extra force is applied via a mallet. Additionally the chisel end features a curve making it well suited to the contour of bone and reducing splintering making it a more effective cutting tool. This instrument is available in both a straight or curved profile and in a ten different widths making it highly customizable and suitable for almost any neurosurgical procedures.
Stille Pattern Gouge
SKU:
TT-SI-9671
straight, 8" (20.0 cm)Â Stille Pattern Gouge is uniquely suited for use in neurosurgical procedures that require cutting and prepping bone. This instrument features a handle that narrows to a slim neck and again widens again to create a funnel type blade. This gouge is prefect for scraping or scooping bone or even in creating holes in the bone itself. The curvature of the blade makes it well contoured to bone and facilitates the cutting process. Additionally this instrument is available six widths: 8.0 mm, 10.0 mm, 12.0 mm, 15.0 mm, 20.0 mm and 25.0 mm making it highly versatile and useful in a wide variety of surgical scenarios.
Reviews
There are no reviews yet.