Name | Double Action Pin Cutter |
Lead Time | 0-3 days |
Specialty | Neuro, Ortho & Spine-Wire/Pin Cutters & Pliers |
Material Finish | Stainless Steel |
Grade | Premium Operating Room |
Units of Measurement | Each |
Manufacturer | Tool Tectra |
Sterility | Non-Sterile |
Usage | Reusable |
Double Action Pin Cutter
side cutting maximum capacity 1?8″ (3.2mm), 9-1/2″ (24.1 cm)Double Action Pin Cutter is an instrument ideally suited for use in surgical procedures that require the insertion of surgical pins and subsequently the clipping and resizing of their lengths. Many orthopedic and neurosurgical spinal procedures require the insertion of pins to stabilize a repaired fracture or an inserted graft. These pins often need to be trimmed to allow them to be set at a more appropriate length for the individual patient and these cutter can be used for that. This instrument is double action and is side cutting and has a maximum capacity of 3.2 mm.
SKU:
TT-SI-9524
Category: Wire & Pin Management Instruments
Description
Reviews (0)
Be the first to review “Double Action Pin Cutter” Cancel reply
Shipping & Delivery
Related products
Flat Nose Pliers & Cutter
SKU:
TT-SI-1573
3.5mm tip, cuts 0.2 mm to 1.5 mm wire, 6-1/2" (16.5 cm)Â Flat Nose Pliers are ideally suited for use in manipulation of wire. Particularly these pliers can be used in situations where it is required to make very sharp, angled bends in the wire. The delicate jaw of this instrument tapers to 2 mm which allows it to be used in manipulating cerclage wire. Additionally this instrument measure 6" long and is forged from premium German grade steel making it a finely crafted and reliable instrument.
Hercules-Type Cable Cutter
SKU:
TT-SI-8718
replaceable tungsten carbide blades, for 1.0 mm to 2.0 mm cables, 7" (18.0 cm)Â Hercules-Type Cable Cutter can be used to trim and adjust the length of cables. This instrument features replaceable tungsten carbide blades that can be used on for cables from 1.0 mm to 2.0 mm. Tungsten carbide jaws gives this instrument added strength as it is the hardest metal made for surgical instruments and results in a supremely durable jaw that can be used for sustained cutting. Additionally this instrument is 7" long and has gold tipped handles.
Flat Nose Pliers – Slender Jaws
SKU:
TT-SI-9258
slender jaws, 2.0 mm tip, 6" (15.2 cm)Â Flat Nose Pliers and Cutter is a multi-functional instrument that can be used as a pliers to manipulate the wire but also as a cutter to trim it to the appropriate length. This combination instrument also features a tapered jaw that allows it to access some areas that are more difficult to get to. Additionally, the flat nose prevents any trauma to surrounding tissue areas.
Hercules-Type Front & Side Cutter
SKU:
TT-SI-3474
replaceable tungsten carbide blades w/ integrated rubber jaws, for max 1.6 mm drill wire, 7" (17.8 cm)Hercules-Type Front & Side Cutter is a multi-purpose instrument suitable for a variety of orthopedic procedures in which wire or pins are used. Fracture repair procedures can utilize pins to set the bone fragments or can be approximated by wrapping wire around. This instrument is ideally suited for manipulation of wire and pins as well as cutting them either from a front or a side approach. This instrument features replaceable tungsten carbide jaws with integrated rubber jaws for a maximum 1.6 mm drill wire.
Hercules-Type Wire Cutter – 3.0 mm Wire Max
SKU:
TT-SI-8453
for drill-wires of max 3.0 mm, replaceable tungsten carbide blades & replaceable rubber jaws, 9" (23.0 cm)Hercules-Type Wire Cutter is a highly reliable instrument made for use in a variety of surgical procedures that require wire and thus cutting of wire. This wire cutter is specifically designed for use with drill-wires at a maximum 3.0 mm. This instrument features replaceable tungsten carbide blades which are inherently more durable than stainless steel and have an extended service-life. It also features replaceable rubber jaws making it highly versatile and customizable to accommodate a vast array of surgical scenarios. This instrument is available in either a standard design or left-handed.
Demel Wire Guide
SKU:
TT-SI-2484
Demel Wire Guide is a specialized instrument crafted for use in surgical procedures that require the addition of wire. This instrument features a smooth handle from which extends a slim neck and a hook shaped head. Many orthopedic procedures require the use of wire for stability such as to wrap around a bone to approximate a fracture and this instrument can be used to comfortably manipulate wire. This instrument is available in three sizes 30.0 mm, 47.0 mm and 57.0 mm diameters.
End Cutter – Double Spring, Large, Tungsten Carbide
SKU:
TT-SI-6937
tungsten carbide jaws, double-action, maximum capacity 3?32" (2.5mm), 8-1/2" (21.6 cm)Â End Cutter is a unique instrument designed for cutting of surgical pins or wire. Many orthopedic and neurosurgical spinal procedures require the use of such stabilization accessories to prevent trauma during recovery and confer additionally stability. This instrument is particularly well suited for end cutting which allows it to be made flush with the edge of bone or other tissue ares where it is being used. Additionally this end cutter is double-action and features tungsten carbide jaws with a maximum capacity of 3/32".
Blunt Jaw Pliers
SKU:
TT-SI-7873
5-1/2" (14.0 cm)Â Blunt Jaw Pliers can be used in a variety of surgical procedures that require the insertion and manipulation of wires. This instrument features slightly rounded handles which makes it easy to hold and operate manually and is a traditionally utility poliers with adjustable jaws. The blunt jaws prevent breakage and splintering of the wire and allows for increased pressure to reshape it to the appropriate shape. Wires can be used to approximate fractures or can be inserted through skin and bone to provide traction on the bone.
Reviews
There are no reviews yet.