Name | Cobb Spinal Gouge |
Lead Time | Lead time advised within 48 hours of order placement. |
Specialty | Neuro, Ortho & Spine-Chisels & Gouges |
Material Finish | Stainless Steel |
Grade | Premium Operating Room |
Units of Measurement | Each |
Manufacturer | Tool Tectra |
Sterility | Non-Sterile |
Usage | Reusable |
Cobb Spinal Gouge
hexagonal handle, 9-1/2″ (24.1 cm)Â Cobb Spinal Gouge is a specially crafted instrument for use in spinal surgeries. This instrument features a solidly designed hexagonal handle which gives adequate area for gripping. The gouge is designed to be used in the close spaces of the vertebral canal and other areas encountered in spinal surgery to make holes or to scrape away at bone. It is available in four different styles: straight, medium curve, strong curve and reverse curve making it well suited for a vast array of surgical scenarios and satisfy any surgeon preference.
SKU:
TT-SI-7235
Category: Osteotomes Chisels & Gouges
Description
Reviews (0)
Be the first to review “Cobb Spinal Gouge” Cancel reply
Shipping & Delivery
Related products
Dawson-Yuhl Gouge
SKU:
TT-SI-3471
7.0 mm, 11" (28.0 cm)Â Dawson- Yuhl Gouge is specially crafted for delicate work in bone manipulation. It features a 7 mm gouge that can be used to scrape along bone or with a mallet be used to create holes or splinter bone to gain access to the inside. Uniquely this instrument is available in two different styles, straight or bayonet, allowing the perfect fit for any particular surgical maneuver.
Mini-Lambotte Osteotome
SKU:
TT-SI-9143
swiss pattern, 5-1/8" (13.0 cm)Â Mini-Lambotte Osteotome is an instrument designed for use in cutting bone. This osteotome is crafted with a Swiss pattern. Osteotome offer significant advantages over drilling because they do not generate heat which can be damaging and also offer an increased level of tactile sensation. This instrument is available in a straight profile at twelve different lengths from 2.0 mm to 24.0 mm in 2 mm increments or in a set of nine. This instrument is also available in a curved profile in seven different lengths from 2.0 to 14.0 mm in 2 mm increments.
Lambotte Osteotome – W/ Calibration Lines
SKU:
TT-SI-3516
w/ calibration lines, 7-1/4" (18.4 cm)Lambotte Osteotome is designed for use in neurosurgical procedures that require manipulation of bone. This instrument is designed to be used manually to cut through bone. It offers many advantages over drills or mechanical tools such as increased sensitivity to adjust the level of force. Additionally this osteotome has the added benefit of featuring calibration lines. This osteotome is available in twelve widths in a straight profile as well as two widths in a curve profile. A full set of ten featuring straight and curved profiles is also available.
Stille Osteotome
SKU:
TT-SI-9943
straight, 8" (20.0 cm)Stille Osteotome is crafted for use in neurosurgical procedures that require cutting or chiseling through bones. This osteotome features a chisel tip that can be used to scrape or sculpt bone. Additionally on the opposite end of the chisel affixed to the handle is a wide blunt end that can be hammered on to drive the chisel into bone. This instrument is available in eleven different widths ranging from 4.0 mm to 25.0 mm making it well suited for use in wide ranging procedures that require small modifications to skull bone or cuts through entire vertebrae.
Lambotte Osteotome – W/Out Calibration Lines
SKU:
TT-SI-2619
w/ out calibration lines, 9" (23.0 cm)Lambotte Osteotome is specifically designed for uses such a bone cutting. This instrument is a flat metal piece that tapers on one end and is slightly curved out of the plane of the handle. Osteotomes have the added benefit of being operated manually and thus the pressure can be adjusted readily as cuts are created and continued through bone. Additionally this osteotome does not have calibration lines. It is available in a vast array of sizes ranging form 4.0 mm to 50 mm and in either a straight or curved profile making them well suited for a wide array of surgical scenarios and surgeon preferences.
McCulloch Osteotome
SKU:
TT-SI-3782
8-1/2" (22.0 cm)Â McCulloch Osteotome is an instrument very similar to a bone chisel. This osteotome can be used in many different neurosurgical and orthopedic type surgical interventions that require manipulation of bone. It features a slim handle and a further flattened body that ends in a chisel type point that allows for scooping or scraping of the bone for a variety of reasons including increasing access and visualization to the surgical field. Additionally this osteotome is available in either 4.0 mm width or 6.0 mm width making it suitable for a vast array of surgical procedures.
Swan Neck Gouge
SKU:
TT-SI-2161
9" (23.0 cm)Â Swan Neck Gouge is an instrument designed for gouging or removing particular sections of bone. Additionally it can also be used as a chisel with increased force applied to it to split bone or to scoop out segments to increase access to the center. A unique feature of this particular gouge is the swan shaped curvature that allows it to access difficult to reach areas without obscuring the surgical field and keeping the handle out the plane of surgery.
Cobb Spinal Gouges
SKU:
TT-SI-9242
round knurled handle, 11" (28.0 cm)Â Cobb Spinal Gouge is a specially crafted instrument for use in spinal surgeries. This instrument features a round knurled handle, these micro serrations allow for added gripping to prevent slipping during use. The gouge is designed to be used in the close spaces of the vertebral canal and around it to make holes or to scrape away at bone. It is available in four different styles: straight, medium curve, strong curve and reverse curve making it well suited for a vast array of surgical scenarios and satisfy any surgeon preference.
Reviews
There are no reviews yet.