Name | Gelpi-Seltz Retractor |
Lead Time | Lead time advised within 48 hours of order placement. |
Specialty | General Instruments-Hooks & Retractors – Self-Retaining Retractors |
Material Finish | Stainless Steel |
Grade | Premium Operating Room |
Units of Measurement | Each |
Manufacturer | Tool Tectra |
Sterility | Non-Sterile |
Usage | Reusable |
Gelpi-Seltz Retractor
Gelpi-Seltz Retractor
90-degree bent tips, 6-3/4″ (17.1 cm)
Gelpi-Seltz Retractor is designed with 90 degree bent tips at the end of the blades, which are also bowed away from each other so that an incision can be kept apart during general surgical procedures. Due to the fact that these tips are smaller in size, its performance is greater when used to retract incisions that are shallower. Once the proper position is applied, the locking mechanism enables the instrument to stay in place until it is released.
SKU:
TT-SI-7718
Category: Hooks & Retractors
Description
Reviews (0)
Be the first to review “Gelpi-Seltz Retractor” Cancel reply
Shipping & Delivery
Related products
Davis Brain Spatula
SKU:
TT-SI-9849
Davis Brain Spatula
malleable, 7" (17.5 cm)
Davis Brain Spatula is 7" in length and comes in a variety of widths to accommodate different cases. This instrument is commonly used in neurology procedures to hold the opening in the brain while operating. The spatula is also malleable, which allows it to bend and fit the size or depth of the operated brain. Following the conclusion of the surgery, a small hammer is used to strike the spatula in order to restore it to its initial shape.
Balfour Standard Center Blade – For Fixed System
SKU:
TT-SI-1326
For balfour retractor systems w/ fixed side blades
Balfour Supra-Pubic Center Blade is available in different sizes to accommodate different surgical procedures and patients. The blade is curved and has lips around the edges to assist in operations such as a Suprapubic Cystostomy. This center blade may also be detached when used with the Balfour Retractor Systems.
Cushing Vein Retractor
SKU:
TT-SI-2523
Cushing Vein Retractor
Cushing Vein Retractor has a sharply curved blade and is a popular retractor used during neurosurgery or as rib spreaders. In this way, the ribs or the tissues that are held can be pulled and kept away from the surgical area. Depending on the situation, this instrument is available in different lengths and widths.
Deaver Retractor – Flat Handle
SKU:
TT-SI-4623
Deaver Retractor - Flat Handle
flat handle, flexible
Deaver Retractor with a flat handle contains a flexible curved blade that is offered in two different widths and lengths depending on the surgical requirements. During general operations, specifically the involvement of the abdominal or chest cavity, this retractor can allow the surgeon to move one side of the incision to access the area that needs attention. If a deeper section needs to be accessed, the longer and wider blade may be more beneficial.
Abdominal Retractor W/ Fixed Side Blades – 2 1/2″ Deep
SKU:
TT-SI-2532
w/ fixed fenestrated side blades, 2-1/2" deep & center blade #2470-72 (3" x 2")
Balfour Abdominal Retractor with Fixed Side Blades incorporates 2 ½" deep fenestrated side blades that are attached onto the center blade, which is 3" wide x 2" deep. Two different sizes of this retractor are offered according to the maximum spread they provide. The side blades of this particular retractor can be pushed and held away from each other to open up an incision in the abdominal cavity.
Balfour Supra-Pubic Center Blades
SKU:
TT-SI-7713
Center Blades
for balfour retractor systems w/ fixed side blade
Balfour Supra-Pubic Center Blades can be useful during procedures such as a Suprapubic cystotomy. When the bladder is retracted, this instrument provides the surgeon with a larger viewing area so that the procedure can be conducted. This blade is presented in two different sizes.
Balfour Abdominal Retractor W/ Fixed Side Blades
SKU:
TT-SI-4989
w/ ratchet bar mechanism, w/ fixed fenestrated side blades, 7-1/8" (18.1 cm) maximum spread
Balfour Abdominal Retractor with Fixed Side Blades contains a ratchet bar mechanism and side blades that are fenestrated. These side blades are designed to push apart an incision while the ratchet holds the instrument in position. The solid center blade, however, can be lowered or raised to provide better visibility for the surgeon.
Crile Retractor
SKU:
TT-SI-6848
Crile Retractor
double-ended, 3.0 mm x 11.0 mm & 6.0 mm x 20.0 mm blades, 4-1/2" (11.4 cm)
Crile Retractor is a hand-held instrument that can hold back tissue or organs so that the surgical site can be accessed. This retractor has a wide body and right-angle blades on each end to maintain the desired position once inserted around the edges of an incision. It is offered in a 4 ½" length, which is idea for smaller openings.
Reviews
There are no reviews yet.