Name | Mayo-Blake Gall Stone Forceps |
Lead Time | Lead time advised within 48 hours of order placement. |
Competitor | ;514050;51-4050;5140-50;514051;51-4051;5140-51;5140-50_5140-51; |
Specialty | General Instruments-Ring-Handled Forceps – Gall Duct |
Material Finish | Stainless Steel |
Grade | Premium Operating Room |
Units of Measurement | Each |
Manufacturer | Tool Tectra |
Sterility | Non-Sterile |
Usage | Reusable |
Mayo-Blake Gall Stone Forceps
Mayo-Blake Gall Stone Forceps
8″ (20.0 cm)
Mayo-Blake Gall Stone Forceps are 8″ long and are designed with looped jaw tips that curve inward to facilitate in holding the stones that are eradicated from the gall bladder. To further simplify the grasp, ring-handles are featured with a locking mechanism that keep the forceps held in place. Depending on the requirements of the procedure, the jaws are also offered in a straight or curved style.
SKU:
TT-SI-2617
Category: Forceps & Clamps
Description
Reviews (0)
Be the first to review “Mayo-Blake Gall Stone Forceps” Cancel reply
Shipping & Delivery
Related products
Adson Thumb Forceps – Fenestrated Handles
SKU:
TT-SI-8816
Fenestrated handles, lightweight, 4-3/4" (12.1 cm)
Adson Thumb Forceps with Fenestrated Handles are handcrafted from surgical grade German stainless steel. Available in a variety of forms: for dressings with a serrated platform or for tissue with a serrated platform and 1x2 teeth. This lightweight model is ideal for plastic surgery procedures or any other procedure where surgeon fatigue may pose an issue.
Adson Suture Forceps
SKU:
TT-SI-7434
Adson Suture Forceps
w/ tying platform, 2.0 mm tips, 4-3/4" (12.1 cm), smooth platform
Adson Suture Forceps with Tying Platform are handcrafted from surgical grade German stainless steel. These forceps are designed with 2.0 mm tips and a tying platform. Available with a smooth platform to securely hold a suture or with 1x2 teeth and a smooth platform for extra grip. This instrument is protected by Tool Tectra manufacturer warranty on defects in materials and workmanship.
Adson-Baby Forceps
SKU:
TT-SI-7779
Adson-Baby Forceps
narrow, curved, very delicate
Adson-Baby Forceps are typically used to grasp delicate tissue due to during general surgeries, especially in plastic surgery procedures. The very delicate pattern of the forceps includes partially serrated jaws that are narrow and curved. These jaws are also offered in two different lengths and are intended for tissue to be handled carefully.
Allis Tissue Forcep
SKU:
TT-SI-5524
Allis Tissue Forceps
standard pattern
standard pattern of the Allis Tissue Forceps are intended for the use of firmly grabbing or holding body tissue during surgery. This pattern includes a ratchet ring-handle with a selection of different sizes and types of teeth to accommodate various medical procedures. These teeth curve to the inside and may cause less harm to the tissue because of decreased general pressure applied to the area.
Allis Tissue Forceps – Atraumatic Jaws
SKU:
TT-SI-9543
Jaws w/ atraumatic parallel serrations
Allis Tissue Forceps contain jaws with atraumatic parallel serrations. These types of serrations are designed to eliminate damage caused to the tissue when trying to grasp or hold it during surgery. The adjustable ratchet ring-handle provides the forceps to be held in a locked position. This instrument is also presented with narrow or standard jaws with an option of 6" or 8" length.
Adair-Allis Tissue Forceps
SKU:
TT-SI-4133
9x10 teeth, 6" (15.0 cm)
Adair-Allis Tissue Forceps are 6" long and are primarily used in general procedures in instances such as when diseased tissue needs to be held. The 9x10 teeth on the tips of the jaws provide a sure grasp of the tissue being held, and can also be used to approximate the edges of the membrane that creates the abdominal cavity lining.
Adlerkreutz Tissue Forceps
SKU:
TT-SI-5288
Adlerkreutz Tissue Forceps
4x5 teeth
Adlerkreutz Tissue Forceps are handcrafted from surgical grade German stainless steel. Designed with 4x5 teeth for a secure grip on tissues. The design allows precise dissection and tissue handling while the teeth assure a secure grasp. Available in a 6" or 8" model.
Babcock Tissue Forceps – Tungsten Carbide
SKU:
TT-SI-7472
Tungsten carbide jaws
Babcock Tissue Forceps have jaws that are made from tungsten carbide, the hardest metal made for surgical instruments. Precision-milled serrations are formed onto the tungsten carbide inserts, resulting in pyramid-shaped teeth that provide a non-slip grip. Pyramid-shaped teeth align perfectly with each other to provide a durable and reliable grasp of the most delicate or toughest tissues, as well as needles, sutures, dressing materials and delicate vessels. Smooth tungsten carbide inserts are also available for delicate procedures. Spring tension allows for surgeons to maintain proper and consistent position, ensuring optimal grip without having to apply excess force. These forceps also feature gold-plated handles.
Reviews
There are no reviews yet.