Name | Malik Cystic Duct Forceps |
Lead Time | Lead time advised within 48 hours of order placement. |
Competitor | ;513369;51-3369;5133-69; |
Specialty | General Instruments-Ring-Handled Forceps – Gall Duct |
Material Finish | Stainless Steel |
Grade | Premium Operating Room |
Units of Measurement | Each |
Manufacturer | Tool Tectra |
Sterility | Non-Sterile |
Usage | Reusable |
Malik Cystic Duct Forceps
Malik Cystic Duct Forceps
8-1/2″ (21.5 cm)
Malik Cystic Duct Forceps have jaws that are curved at a right angle to provide a better grasp to areas that are harder to reach. For example, if a patient has cholecystisis, the forceps are used to grasp the cystic duct. This instrument is offered in an 8 ½” length for deep locations.
SKU:
TT-SI-2151
Category: Forceps & Clamps
Description
Reviews (0)
Be the first to review “Malik Cystic Duct Forceps” Cancel reply
Shipping & Delivery
Related products
Adson Bayonet Dressing Forceps
SKU:
TT-SI-2361
7-1/2" (19.0 cm)
Adson Bayonet Dressing Forceps are handcrafted from surgical grade German stainless steel. Designed with its bayonet handle angled and 90 degrees from the grasping direction, these dressing forceps offer a leverage not seen with standard models. The serrated handle assures a firm grip on this instrument.
Babcock Tissue Forceps
SKU:
TT-SI-2127
Babcock Tissue Forceps
standard pattern.
Babcock Tissue Forceps come in a standard pattern with semicircular rounded tips to allow for holding or grasping delicate body structures. These forceps are crafted from premium German operating-room grade stainless steel and are available in a wide variety of lengths.
Allis Tissue Forceps – Atraumatic Jaws
SKU:
TT-SI-9543
Jaws w/ atraumatic parallel serrations
Allis Tissue Forceps contain jaws with atraumatic parallel serrations. These types of serrations are designed to eliminate damage caused to the tissue when trying to grasp or hold it during surgery. The adjustable ratchet ring-handle provides the forceps to be held in a locked position. This instrument is also presented with narrow or standard jaws with an option of 6" or 8" length.
Adson Thumb Forceps – Fenestrated Handles
SKU:
TT-SI-8816
Fenestrated handles, lightweight, 4-3/4" (12.1 cm)
Adson Thumb Forceps with Fenestrated Handles are handcrafted from surgical grade German stainless steel. Available in a variety of forms: for dressings with a serrated platform or for tissue with a serrated platform and 1x2 teeth. This lightweight model is ideal for plastic surgery procedures or any other procedure where surgeon fatigue may pose an issue.
Allis Tissue Forcep
SKU:
TT-SI-5524
Allis Tissue Forceps
standard pattern
standard pattern of the Allis Tissue Forceps are intended for the use of firmly grabbing or holding body tissue during surgery. This pattern includes a ratchet ring-handle with a selection of different sizes and types of teeth to accommodate various medical procedures. These teeth curve to the inside and may cause less harm to the tissue because of decreased general pressure applied to the area.
Adson-Baby Forceps
SKU:
TT-SI-7779
Adson-Baby Forceps
narrow, curved, very delicate
Adson-Baby Forceps are typically used to grasp delicate tissue due to during general surgeries, especially in plastic surgery procedures. The very delicate pattern of the forceps includes partially serrated jaws that are narrow and curved. These jaws are also offered in two different lengths and are intended for tissue to be handled carefully.
Adair-Allis Tissue Forceps
SKU:
TT-SI-4133
9x10 teeth, 6" (15.0 cm)
Adair-Allis Tissue Forceps are 6" long and are primarily used in general procedures in instances such as when diseased tissue needs to be held. The 9x10 teeth on the tips of the jaws provide a sure grasp of the tissue being held, and can also be used to approximate the edges of the membrane that creates the abdominal cavity lining.
Babcock Tissue Forceps – Tungsten Carbide
SKU:
TT-SI-7472
Tungsten carbide jaws
Babcock Tissue Forceps have jaws that are made from tungsten carbide, the hardest metal made for surgical instruments. Precision-milled serrations are formed onto the tungsten carbide inserts, resulting in pyramid-shaped teeth that provide a non-slip grip. Pyramid-shaped teeth align perfectly with each other to provide a durable and reliable grasp of the most delicate or toughest tissues, as well as needles, sutures, dressing materials and delicate vessels. Smooth tungsten carbide inserts are also available for delicate procedures. Spring tension allows for surgeons to maintain proper and consistent position, ensuring optimal grip without having to apply excess force. These forceps also feature gold-plated handles.
Reviews
There are no reviews yet.