Name | Side Wire/Pin Cutter – Double-Action, Angled Jaws, Tungsten Carbide |
Lead Time | 0-3 days |
Competitor | ;LX159R;322815;32-2815;OS3052001;OS3052-001;VM612236;VM61-2236;275510;275-510;MDS3354517;32127;323372;32-127;32-3372;27-159TC;27159TC;3212-70;LX157R;MG025R;322820;32-2820;OS3052002;OS3052-002;275515;275-515;MDS3354521;MDS3354522;32128;32-128;391.93;39193;KM46624;KM46-624;51-0960;510960;3212-80;3212-70_3212-80; |
Specialty | Neuro, Ortho & Spine-Wire/Pin Cutters & Pliers |
Material Finish | Stainless Steel/Tungsten Carbide |
Grade | Premium Operating Room |
Units of Measurement | Each |
Manufacturer | Tool Tectra |
Sterility | Non-Sterile |
Usage | Reusable |
Side Wire/Pin Cutter – Double-Action, Angled Jaws, Tungsten Carbide
tungsten carbide jaws, double-action, angled jaws Side Wire/Pin Cutter is a multi-purpose instrument that can be used to trim either surgical pins or wires. A variety of surgical procedures require the addition of wire to aid in stability and give a graft or other portion of bon some stability as it recovers. Additionally surgical pins are ubiquitously used in orthopedic procedures of the bone such as fracture repair to hold things in place. This instrument can be used to cut and trim both of these surgical accessories to make them even and level with their surroundings. This cutter features angled jaws and is available in a 1.7 mm maximum capacity or 2.5 mm maximum capacity.
SKU:
TT-SI-1485
Category: Wire & Pin Management Instruments
Description
Reviews (0)
Be the first to review “Side Wire/Pin Cutter – Double-Action, Angled Jaws, Tungsten Carbide” Cancel reply
Shipping & Delivery
Related products
Delicate Wire Cutter – Tungsten Carbide
SKU:
TT-SI-2314
tungsten carbide jaws, cuts up to 1/36" (0.7 mm) diameter hard wire, 4-3/4" (12.1 cm)Â Delicate Wire Cutter is a versatile instrument crafted for use in trimming and cutting lengths of wire. Procedures such as laminectomies require addition of wire to confer some stability to the vertebrae to prevent trauma as healing occurs. This particular cutter is specifically designed for use with delicate wires. It features tungsten carbide jaws and are capable of cutting hard wire up to a diameter of 0.7 mm.
Cannulated Pin Cutter
SKU:
TT-SI-7441
end cutting, max cutting capacity 1/16" (1.7 mm), 7-1/2" (19.0 cm)Â Cannulated Pin Cutter is a specialized instrument ideally suited or use in procedures of fracture repair or other procedures where a graft is set with a pin. The unique design of this cutter allows for effective end cutting. The entire head portion of the pin can be inserted into the cutter and clipped flush and the remaining clipped portion remains held in the cutter to be removed. The maximum cutting capacity of this pin cutter is 1.7 mm.
Demel Wire Guide
SKU:
TT-SI-2484
Demel Wire Guide is a specialized instrument crafted for use in surgical procedures that require the addition of wire. This instrument features a smooth handle from which extends a slim neck and a hook shaped head. Many orthopedic procedures require the use of wire for stability such as to wrap around a bone to approximate a fracture and this instrument can be used to comfortably manipulate wire. This instrument is available in three sizes 30.0 mm, 47.0 mm and 57.0 mm diameters.
Double Action Pin Cutter
SKU:
TT-SI-9524
side cutting maximum capacity 1?8" (3.2mm), 9-1/2" (24.1 cm)Double Action Pin Cutter is an instrument ideally suited for use in surgical procedures that require the insertion of surgical pins and subsequently the clipping and resizing of their lengths. Many orthopedic and neurosurgical spinal procedures require the insertion of pins to stabilize a repaired fracture or an inserted graft. These pins often need to be trimmed to allow them to be set at a more appropriate length for the individual patient and these cutter can be used for that. This instrument is double action and is side cutting and has a maximum capacity of 3.2 mm.
K-Wire Side Cutter – Tungsten Carbide
SKU:
TT-SI-2311
tungsten carbide jaws, cuts up to 0.047" (1.1 mm) diameter hard wire, 6" (15.2 cm)Â K-Wire Side Cutter is a versatile instrument that can be used in a variety of surgical procedures. It is specifically designed for use in cutting wire in a particular perpendicular orientation. The unique design of this instrument allows it to comfortably be set flush against the areas where the wire has been inserted and clip it at a length that makes it the best fit. A variety of spinal procedures require for the placement of wire through the newly grafted area to give additional support throughout recovery and this instrument can be used in manipulation and cutting of these wires. Additionally this instrument features tungsten carbide jaws and can cut wires up to a diameter of 1.1 mm.
Flat Nose K-Wire Pliers
SKU:
TT-SI-1214
serrated jaws, 7" (17.8 cm), 3.0 mm tip Flat Nose K-Wire Pliers are instruments ideally suited for use with surgical K-wire. This wire can be used for temporary fixation in some procedures thus giving support through the healing process and then can be removed. Additionally K-wire can be used in permanent fixation and can also be passed through the skin and bone to provide direct traction to the bone itself. In all of this surgical scenarios this instrument will be of optimal function in manipulation and handling of the wire and features serrated jaws which gives added hold and grip to prevent slipping. This instrument is available with or without a grooved jaw.
Berry Sternal Needle Holder & Wire Twister
SKU:
TT-SI-3966
tungsten carbide inserts, heavy pattern, 6.0 mm jaws, 7-3/4" (19.5 cm)Â Berry Sternal Needle Holder & Wire Twister is a highly versatile instrument that is useful in a vast array of surgical settings. Not only does it serve as a needle holder to aid in suturing during and at the close of surgery but it has other uses as well. The same ability to grip that makes it ideal for use in needle manipulation also makes it ideally suited for twisting wire. Many procedures require the placement of a wire to hold something together or to give some temporary stability while the body heals.
Flat Nose Pliers
SKU:
TT-SI-5881
serrated jaws, 5-1/2" (14.0 cm)Â Flat Nose Pliers are ideally suited for use in manipulation of wire. Particularly these pliers can be used in situations where it is required to make very sharp, angled bends in the wire. The wider tip makes this instrument ideal for grasping Steinmann pins and K-wires. Additionally this instrument measure 5.5" long and is forged from premium German grade steel making it a finely crafted and reliable instrument.
Reviews
There are no reviews yet.