Name | Kirschner Bow |
Lead Time | Lead time advised within 48 hours of order placement. |
Competitor | ;764001;76-4001;7640-01;734808;73-4808;764002;76-4002;KM48272;7640-02;764003;76-4003;KM48274;7640-03;764241;76-4241;7642-41;7640-01_7642-41; |
Specialty | Neuro, Ortho & Spine-Wire Tighteners |
Material Finish | Stainless Steel |
Grade | Premium Operating Room |
Units of Measurement | Set |
Manufacturer | Tool Tectra |
Sterility | Non-Sterile |
Usage | Reusable |
Kirschner Bow
Kirschner Bow is an instrument that can be used in a variety of orthopedic surgical procedures. A kirschner wire can be used to stabilize and approximate fractures after surgical repair. These wires can be quite easy to insert but must be manipulated with the proper instrumentation such as this bow. This bow applies a longitudinal force of tension that prevents rotation of the wire within the apparatus. This instrument is available in three sizes: medium, large and extra large as well as a set of 3 extra hooks for the krischner bow.
SKU:
TT-SI-6541
Category: Wire & Pin Management Instruments
Description
Reviews (0)
Be the first to review “Kirschner Bow” Cancel reply
Shipping & Delivery
Related products
Flat Nose Pliers & Cutter
SKU:
TT-SI-1573
3.5mm tip, cuts 0.2 mm to 1.5 mm wire, 6-1/2" (16.5 cm)Â Flat Nose Pliers are ideally suited for use in manipulation of wire. Particularly these pliers can be used in situations where it is required to make very sharp, angled bends in the wire. The delicate jaw of this instrument tapers to 2 mm which allows it to be used in manipulating cerclage wire. Additionally this instrument measure 6" long and is forged from premium German grade steel making it a finely crafted and reliable instrument.
K-Wire Side Cutter – Tungsten Carbide
SKU:
TT-SI-2311
tungsten carbide jaws, cuts up to 0.047" (1.1 mm) diameter hard wire, 6" (15.2 cm)Â K-Wire Side Cutter is a versatile instrument that can be used in a variety of surgical procedures. It is specifically designed for use in cutting wire in a particular perpendicular orientation. The unique design of this instrument allows it to comfortably be set flush against the areas where the wire has been inserted and clip it at a length that makes it the best fit. A variety of spinal procedures require for the placement of wire through the newly grafted area to give additional support throughout recovery and this instrument can be used in manipulation and cutting of these wires. Additionally this instrument features tungsten carbide jaws and can cut wires up to a diameter of 1.1 mm.
Hercules-Type Wire Cutter – 4.0 mm Wire Max
SKU:
TT-SI-4248
for drill-wires of 2.5 - 4.0 mm, replaceable tungsten carbide blades & replaceable rubber jaws, 11" (27.9 cm) Hercules-Type Wire Cutter is a highly reliable instrument made for use in a variety of surgical procedures that require wire and thus cutting of wire. This wire cutter is specifically designed for use with drill-wires at a maximum ranging from 2.5 – 4.0 mm. This instrument features replaceable tungsten carbide blades which are inherently more durable than stainless steel and have an extended service-life. It also features replaceable rubber jaws making it highly versatile and customizable to accommodate a vast array of surgical scenarios. This instrument is available in either a standard design or left-handed.
Flat Nose K-Wire Pliers
SKU:
TT-SI-1214
serrated jaws, 7" (17.8 cm), 3.0 mm tip Flat Nose K-Wire Pliers are instruments ideally suited for use with surgical K-wire. This wire can be used for temporary fixation in some procedures thus giving support through the healing process and then can be removed. Additionally K-wire can be used in permanent fixation and can also be passed through the skin and bone to provide direct traction to the bone itself. In all of this surgical scenarios this instrument will be of optimal function in manipulation and handling of the wire and features serrated jaws which gives added hold and grip to prevent slipping. This instrument is available with or without a grooved jaw.
Cable Cutter – Tungsten Carbide
SKU:
TT-SI-3483
tungsten carbide jaws, maximum capacity 2.0 mm, 7" (18.0 cm)Â Cable Cutter is an instrument ideally suited for use in orthopedic procedures. A number of surgical interventions require the placement of steel wires or cable to confer additionally stability to an area of bone. Specifically cable can be used in total hip arthroplasty to give more secure fixation and prevent trauma during the healing process. After inserting the cable it needs to be trimmed and manipulated to be the perfect length for that unique patients scenario. Additionally this instrument features tungsten carbide jaws and has a maximum capacity of 2.0 mm.
Diamond Pin Wire Cutter
SKU:
TT-SI-5311
cuts up to 5/64" (2.0 mm) diameter hard wire, 6-1/2" (16.5 cm)Â Diamond Pin Wire Cutter is a specially designed instrument crafted for use in cutting wire. Many different neurosurgical and orthopedic procedures require the insertion of wire to give the areas additional stability and this cutter can be used to clip these at the desired length. Not only can this instrument be used to trim wire but also surgical pins. Fracture repair and other bone repair surgeries has to be set with pins that also need to be trimmed using this instrument. This instrument is available in two designs: stainless steal or tungsten carbide both of which can cup up to a diameter of 2.0 mm.
Delicate Wire Cutter – Tungsten Carbide
SKU:
TT-SI-2314
tungsten carbide jaws, cuts up to 1/36" (0.7 mm) diameter hard wire, 4-3/4" (12.1 cm)Â Delicate Wire Cutter is a versatile instrument crafted for use in trimming and cutting lengths of wire. Procedures such as laminectomies require addition of wire to confer some stability to the vertebrae to prevent trauma as healing occurs. This particular cutter is specifically designed for use with delicate wires. It features tungsten carbide jaws and are capable of cutting hard wire up to a diameter of 0.7 mm.
Hercules-Type Front & Side Cutter
SKU:
TT-SI-3474
replaceable tungsten carbide blades w/ integrated rubber jaws, for max 1.6 mm drill wire, 7" (17.8 cm)Hercules-Type Front & Side Cutter is a multi-purpose instrument suitable for a variety of orthopedic procedures in which wire or pins are used. Fracture repair procedures can utilize pins to set the bone fragments or can be approximated by wrapping wire around. This instrument is ideally suited for manipulation of wire and pins as well as cutting them either from a front or a side approach. This instrument features replaceable tungsten carbide jaws with integrated rubber jaws for a maximum 1.6 mm drill wire.
Reviews
There are no reviews yet.