Name | Hercules-Type Wire Cutter – 3.0 mm Wire Max |
Lead Time | Lead time advised within 48 hours of order placement. |
Specialty | Neuro, Ortho & Spine-Wire/Pin Cutters & Pliers – Hercules-Type Wire Cutters |
Material Finish | Stainless Steel/Tungsten Carbide/Rubber |
Grade | Premium Operating Room |
Units of Measurement | Each |
Manufacturer | Tool Tectra |
Sterility | Non-Sterile |
Usage | Reusable |
Hercules-Type Wire Cutter – 3.0 mm Wire Max
for drill-wires of max 3.0 mm, replaceable tungsten carbide blades & replaceable rubber jaws, 9″ (23.0 cm)Hercules-Type Wire Cutter is a highly reliable instrument made for use in a variety of surgical procedures that require wire and thus cutting of wire. This wire cutter is specifically designed for use with drill-wires at a maximum 3.0 mm. This instrument features replaceable tungsten carbide blades which are inherently more durable than stainless steel and have an extended service-life. It also features replaceable rubber jaws making it highly versatile and customizable to accommodate a vast array of surgical scenarios. This instrument is available in either a standard design or left-handed.
SKU:
TT-SI-8453
Category: Wire & Pin Management Instruments
Description
Reviews (0)
Be the first to review “Hercules-Type Wire Cutter – 3.0 mm Wire Max” Cancel reply
Shipping & Delivery
Related products
Long Jaw Needle Nose Pliers
SKU:
TT-SI-7173
2-1/4" jaw length, 2.0 mm tip, 7" (17.8 cm)Â Long Jaw Needle Nose Pliers are crafted for use in many different orthopedic surgical procedures. The long tapered jaw design gives the surgeon ability to access deeper into the surgical field. These pliers can be used to firmly grasp wire to twist it or to put particular bends into wire to fasten them to bony sites or around fracture repair to confer additionally stability and accelerate the healing time.
K-Wire Side Cutter – Tungsten Carbide
SKU:
TT-SI-2311
tungsten carbide jaws, cuts up to 0.047" (1.1 mm) diameter hard wire, 6" (15.2 cm)Â K-Wire Side Cutter is a versatile instrument that can be used in a variety of surgical procedures. It is specifically designed for use in cutting wire in a particular perpendicular orientation. The unique design of this instrument allows it to comfortably be set flush against the areas where the wire has been inserted and clip it at a length that makes it the best fit. A variety of spinal procedures require for the placement of wire through the newly grafted area to give additional support throughout recovery and this instrument can be used in manipulation and cutting of these wires. Additionally this instrument features tungsten carbide jaws and can cut wires up to a diameter of 1.1 mm.
Flush Wire Cutter – Tungsten Carbide
SKU:
TT-SI-1161
tungsten carbide jaws, double-action, front & side cutting, cuts up to 1/16" (1.7 mm) diameter hard wire, 7" (17.8 cm)Â Flush Wire Cutter is an instrument designed for use in cutting wires during surgical procedures. A variety of procedures require the insertion of wire to stabilize an inserted graft or fracture repair. This decreases potential for trauma and increases the speed of healing. This cutter features double-action tungsten carbide jaws that allow for precise cuts on wire up to 1.7 mm diameter. This instrument can be used for both front and side cutting.
Double Action Pin Cutter
SKU:
TT-SI-9524
side cutting maximum capacity 1?8" (3.2mm), 9-1/2" (24.1 cm)Double Action Pin Cutter is an instrument ideally suited for use in surgical procedures that require the insertion of surgical pins and subsequently the clipping and resizing of their lengths. Many orthopedic and neurosurgical spinal procedures require the insertion of pins to stabilize a repaired fracture or an inserted graft. These pins often need to be trimmed to allow them to be set at a more appropriate length for the individual patient and these cutter can be used for that. This instrument is double action and is side cutting and has a maximum capacity of 3.2 mm.
End Cutter – Double Spring, Large, Tungsten Carbide
SKU:
TT-SI-6937
tungsten carbide jaws, double-action, maximum capacity 3?32" (2.5mm), 8-1/2" (21.6 cm)Â End Cutter is a unique instrument designed for cutting of surgical pins or wire. Many orthopedic and neurosurgical spinal procedures require the use of such stabilization accessories to prevent trauma during recovery and confer additionally stability. This instrument is particularly well suited for end cutting which allows it to be made flush with the edge of bone or other tissue ares where it is being used. Additionally this end cutter is double-action and features tungsten carbide jaws with a maximum capacity of 3/32".
Berry Sternal Needle Holder & Wire Twister
SKU:
TT-SI-3966
tungsten carbide inserts, heavy pattern, 6.0 mm jaws, 7-3/4" (19.5 cm)Â Berry Sternal Needle Holder & Wire Twister is a highly versatile instrument that is useful in a vast array of surgical settings. Not only does it serve as a needle holder to aid in suturing during and at the close of surgery but it has other uses as well. The same ability to grip that makes it ideal for use in needle manipulation also makes it ideally suited for twisting wire. Many procedures require the placement of a wire to hold something together or to give some temporary stability while the body heals.
Boehler Wire & Pin Extractor
SKU:
TT-SI-4424
Boehler Wire & Pin Extractor can be used in a variety of procedures to manipulate surgical pins and wire. Many orthopedic procedures such as repair of fractures or insertion of support after laminectomy procedures require the use of wire or pin. These added support confer additional stability to the bone and increase the speed of healing while reducing the damage done by trauma. This particular instrument can be used to insert, remove and reshape wires and pins as they are needed. This instrument is available in three different sizes to satisfy a variety of patient needs and surgeon preferences.
Lineman Pliers
SKU:
TT-SI-4368
side-cutting, maximum capacity 1.6 mm, 8-1/2" (21.6 cm)Â Lineman Pliers are a multi-purpose instrument designed for use in surgical procedures to manipulate wire. Many orthopedic surgeries such as fracture repair depend on the use of wire to approximate the fragments and accelerate the healing process. Wires must be manipulated and wrapped to fit the particular scenario where they are needed and these pliers are built for that. They features tungsten carbide jaws and are side cutting with a maximum capacity of 1.6 mm.
Reviews
There are no reviews yet.