Name | End Cutter – Barrel Spring, Small, Tungsten Carbide |
Lead Time | 0-3 days |
Specialty | Neuro, Ortho & Spine-Wire/Pin Cutters & Pliers |
Material Finish | Stainless Steel/Tungsten Carbide |
Grade | Premium Operating Room |
Units of Measurement | Each |
Manufacturer | Tool Tectra |
Sterility | Non-Sterile |
Usage | Reusable |
End Cutter – Barrel Spring, Small, Tungsten Carbide
tungsten carbide jaws, w/ coil spring, maximum capacity 1/16″ (1.7mm), 6″ (15.0 cm)Â End Cutter is a unique instrument designed for cutting of surgical pins or wire. Many orthopedic and neurosurgical spinal procedures require the use of such stabilization accessories to prevent trauma during recovery and confer additionally stability. This instrument is particularly well suited for end cutting which allows it to be made flush with the edge of bone or other tissue areas where it is being used. Additionally this end cutter features tungsten carbide jaws and has a maximum capacity of 1/16″.
SKU:
TT-SI-1378
Category: Wire & Pin Management Instruments
Description
Reviews (0)
Be the first to review “End Cutter – Barrel Spring, Small, Tungsten Carbide” Cancel reply
Shipping & Delivery
Related products
Hercules-Type Wire Cutter – 3.0 mm Wire Max
SKU:
TT-SI-8453
for drill-wires of max 3.0 mm, replaceable tungsten carbide blades & replaceable rubber jaws, 9" (23.0 cm)Hercules-Type Wire Cutter is a highly reliable instrument made for use in a variety of surgical procedures that require wire and thus cutting of wire. This wire cutter is specifically designed for use with drill-wires at a maximum 3.0 mm. This instrument features replaceable tungsten carbide blades which are inherently more durable than stainless steel and have an extended service-life. It also features replaceable rubber jaws making it highly versatile and customizable to accommodate a vast array of surgical scenarios. This instrument is available in either a standard design or left-handed.
Flat Nose Pliers & Cutter
SKU:
TT-SI-1573
3.5mm tip, cuts 0.2 mm to 1.5 mm wire, 6-1/2" (16.5 cm)Â Flat Nose Pliers are ideally suited for use in manipulation of wire. Particularly these pliers can be used in situations where it is required to make very sharp, angled bends in the wire. The delicate jaw of this instrument tapers to 2 mm which allows it to be used in manipulating cerclage wire. Additionally this instrument measure 6" long and is forged from premium German grade steel making it a finely crafted and reliable instrument.
Cable Cutter – Tungsten Carbide
SKU:
TT-SI-3483
tungsten carbide jaws, maximum capacity 2.0 mm, 7" (18.0 cm)Â Cable Cutter is an instrument ideally suited for use in orthopedic procedures. A number of surgical interventions require the placement of steel wires or cable to confer additionally stability to an area of bone. Specifically cable can be used in total hip arthroplasty to give more secure fixation and prevent trauma during the healing process. After inserting the cable it needs to be trimmed and manipulated to be the perfect length for that unique patients scenario. Additionally this instrument features tungsten carbide jaws and has a maximum capacity of 2.0 mm.
Kirschner Bow
SKU:
TT-SI-6541
Kirschner Bow is an instrument that can be used in a variety of orthopedic surgical procedures. A kirschner wire can be used to stabilize and approximate fractures after surgical repair. These wires can be quite easy to insert but must be manipulated with the proper instrumentation such as this bow. This bow applies a longitudinal force of tension that prevents rotation of the wire within the apparatus. This instrument is available in three sizes: medium, large and extra large as well as a set of 3 extra hooks for the krischner bow.
Flush Wire Cutter – Tungsten Carbide
SKU:
TT-SI-1161
tungsten carbide jaws, double-action, front & side cutting, cuts up to 1/16" (1.7 mm) diameter hard wire, 7" (17.8 cm)Â Flush Wire Cutter is an instrument designed for use in cutting wires during surgical procedures. A variety of procedures require the insertion of wire to stabilize an inserted graft or fracture repair. This decreases potential for trauma and increases the speed of healing. This cutter features double-action tungsten carbide jaws that allow for precise cuts on wire up to 1.7 mm diameter. This instrument can be used for both front and side cutting.
Lineman Pliers
SKU:
TT-SI-4368
side-cutting, maximum capacity 1.6 mm, 8-1/2" (21.6 cm)Â Lineman Pliers are a multi-purpose instrument designed for use in surgical procedures to manipulate wire. Many orthopedic surgeries such as fracture repair depend on the use of wire to approximate the fragments and accelerate the healing process. Wires must be manipulated and wrapped to fit the particular scenario where they are needed and these pliers are built for that. They features tungsten carbide jaws and are side cutting with a maximum capacity of 1.6 mm.
End Cutter – Double Spring, Large, Tungsten Carbide
SKU:
TT-SI-6937
tungsten carbide jaws, double-action, maximum capacity 3?32" (2.5mm), 8-1/2" (21.6 cm)Â End Cutter is a unique instrument designed for cutting of surgical pins or wire. Many orthopedic and neurosurgical spinal procedures require the use of such stabilization accessories to prevent trauma during recovery and confer additionally stability. This instrument is particularly well suited for end cutting which allows it to be made flush with the edge of bone or other tissue ares where it is being used. Additionally this end cutter is double-action and features tungsten carbide jaws with a maximum capacity of 3/32".
Diamond Pin Wire Cutter
SKU:
TT-SI-5311
cuts up to 5/64" (2.0 mm) diameter hard wire, 6-1/2" (16.5 cm)Â Diamond Pin Wire Cutter is a specially designed instrument crafted for use in cutting wire. Many different neurosurgical and orthopedic procedures require the insertion of wire to give the areas additional stability and this cutter can be used to clip these at the desired length. Not only can this instrument be used to trim wire but also surgical pins. Fracture repair and other bone repair surgeries has to be set with pins that also need to be trimmed using this instrument. This instrument is available in two designs: stainless steal or tungsten carbide both of which can cup up to a diameter of 2.0 mm.
Reviews
There are no reviews yet.