Name | U.S. Army Pattern Gouges |
Lead Time | Lead time advised within 48 hours of order placement. |
Competitor | ;282206;28-2206;2822-06;282212;28-2212;2822-12;2822-18;2822-06_2822-18; |
Specialty | Neuro, Ortho & Spine-Chisels & Gouges |
Material Finish | Stainless Steel |
Grade | Premium Operating Room |
Units of Measurement | Each |
Manufacturer | Tool Tectra |
Sterility | Non-Sterile |
Usage | Reusable |
U.S. Army Pattern Gouges
6-1/4″ (16.0 cm)Â US Army Pattern Gouge is a specialized instrument designed for removal of specific segments of bone. This gouge is designed similarly to a chisel but the blade portion features a curvature to it allowing it to be used to scoop up segments. The opposite end of this gouge has a rounded, flat end that can be used with a mallet to increase the driving force to effectively pierce through bone. This gouge is available in three sizes 6.0 mm, 12.0 mm and 18.0 mm making them well suited for larger bones in the spinal surgery and smaller ones for more delicate work on the skull.
SKU:
TT-SI-7799
Category: Osteotomes Chisels & Gouges
Description
Reviews (0)
Be the first to review “U.S. Army Pattern Gouges” Cancel reply
Shipping & Delivery
Related products
Dawson-Yuhl Gouge
SKU:
TT-SI-3471
7.0 mm, 11" (28.0 cm)Â Dawson- Yuhl Gouge is specially crafted for delicate work in bone manipulation. It features a 7 mm gouge that can be used to scrape along bone or with a mallet be used to create holes or splinter bone to gain access to the inside. Uniquely this instrument is available in two different styles, straight or bayonet, allowing the perfect fit for any particular surgical maneuver.
U.S. Army Pattern Osteotome
SKU:
TT-SI-2515
6-1/4" (16.0 cm)Â US Army Pattern Osteotome is a versatile instrument for use in manipulating of bone. This osteotome features a straight profile and can be used to cut bone or to carve out small pieces to allow access to more difficult to reach areas. Additionally this osteotome is crafted with a chisel type blade that can be used to scrape, clean or sculpt bone for a variety of surgical procedures. This instrument is available in three sizes 6.0, 12.0 and 18.0 mm.
Alexander Chisel
SKU:
TT-SI-4828
straight, 7" (18.0 cm)Â Alexander Chisel is crafted for use in surgical procedures that require cutting, scraping and reshaping of bone. This chisel features a long shaft and on one end features a blunt, flat end for hammering while the other a sharpened blade style end. The lack of a designed handle area increases the versatile of this instrument because it can be gripped in any way that makes the surgical maneuver the most effective. This chisel is available in six different sizes in 2.0 mm increments from 4.0 mm to 14.0 mm making it well suited for small and large tasks.
McCulloch Hockey Stick Chisel
SKU:
TT-SI-3276
8-1/2" (22.0 cm)Â McCulloch Hockey Stick Chisel is a specialized instrument made for use in orthopedic spinal procedures. It is specifically used in procedures of the spine such as vertebral osteotomy and is particularly well suited with its slim handle and elongated, flattened profile. The angle at the end prevents the tip of the chisel from pierces and causing injury to the spinal cord during surgery. This instrument is available in either a right or left curve making it a versatile tool that fits any patient scenario and satisfies any surgeon preference.
Cherry Osteotome
SKU:
TT-SI-6726
octagonal handle, 8" (20.0 cm)Â Cherry Osteotome is designed for use in cutting and preparation of bone in neurosurgical procedures. This osteotome has a long, slender profile as well as a uniquely designed octagonal handle which allows it to be gripped and maneuvered easily. Additionally this osteotome is available in five widths 3.0, 4.0, 5.0, 6.0 and 7.0 mm and in either a straight or curved profile making it suitable for a wide variety of patient needs and surgical approaches.
Cobb Spinal Gouges
SKU:
TT-SI-9242
round knurled handle, 11" (28.0 cm)Â Cobb Spinal Gouge is a specially crafted instrument for use in spinal surgeries. This instrument features a round knurled handle, these micro serrations allow for added gripping to prevent slipping during use. The gouge is designed to be used in the close spaces of the vertebral canal and around it to make holes or to scrape away at bone. It is available in four different styles: straight, medium curve, strong curve and reverse curve making it well suited for a vast array of surgical scenarios and satisfy any surgeon preference.
Lambotte Osteotome – W/ Calibration Lines
SKU:
TT-SI-3516
w/ calibration lines, 7-1/4" (18.4 cm)Lambotte Osteotome is designed for use in neurosurgical procedures that require manipulation of bone. This instrument is designed to be used manually to cut through bone. It offers many advantages over drills or mechanical tools such as increased sensitivity to adjust the level of force. Additionally this osteotome has the added benefit of featuring calibration lines. This osteotome is available in twelve widths in a straight profile as well as two widths in a curve profile. A full set of ten featuring straight and curved profiles is also available.
Lexer Gouge
SKU:
TT-SI-5864
w/ sterilizable (up to 143 degrees c) plastic handle Lexer Chisel is crafted for use in surgical procedures that require chipping away or splitting bone or more general scraping maneuvers. This gouge features a large plastic handle that is easy to grip. Additionally this handle is sterilizable up to 143 degrees c making it well suited for use in multiple surgical procedures without the concern of contamination or infection. This instrument features a long slim neck that flares out into a flat wide blade perfect for scraping action along bone and also in actual cutting of bone. It is available in a wide variety of widths and two different lengths: 18 cm and 22 cm to accommodate a variety of surgical scenarios and surgeon preferences.
Reviews
There are no reviews yet.