| Name | Cobb Spinal Gouge |
| Lead Time | Lead time advised within 48 hours of order placement. |
| Specialty | Neuro, Ortho & Spine-Chisels & Gouges |
| Material Finish | Stainless Steel |
| Grade | Premium Operating Room |
| Units of Measurement | Each |
| Manufacturer | Tool Tectra |
| Sterility | Non-Sterile |
| Usage | Reusable |
Cobb Spinal Gouge
hexagonal handle, 9-1/2″ (24.1 cm)Â Cobb Spinal Gouge is a specially crafted instrument for use in spinal surgeries. This instrument features a solidly designed hexagonal handle which gives adequate area for gripping. The gouge is designed to be used in the close spaces of the vertebral canal and other areas encountered in spinal surgery to make holes or to scrape away at bone. It is available in four different styles: straight, medium curve, strong curve and reverse curve making it well suited for a vast array of surgical scenarios and satisfy any surgeon preference.
Description
Reviews (0)
Shipping & Delivery
Related products
Alexander Gouge
SKU:
TT-SI-1391
7" (18.0 cm)Â Alexander Gouge is specially designed for use in procedures that require manipulating of bone via scooping or removal of particular portions. This gouge features a long slim handle portion that transitions to the gouge blade. This instrument is designed for chisels but more specifically instead of a flat edge it features a rounded edge that allows it to be used to create holes or to scoop out segments of bone.
U.S. Army Pattern Chisel
SKU:
TT-SI-8579
straight, 6-1/4" (16.0 cm)Â US Army Pattern Gouge is a specialized instrument designed for removal of specific segments of bone. This gouge is designed similarly to a chisel but the blade portion features a curvature to it allowing it to be used to scoop up segments. The opposite end of this gouge has a rounded, flat end that can be used with a mallet to increase the driving force to effectively pierce through bone. This gouge is available in three sizes 6.0 mm, 12.0 mm and 18.0 mm making them well suited for larger bones in the spinal surgery and smaller ones for more delicate work on the skull.
Stille Osteotome
SKU:
TT-SI-9943
straight, 8" (20.0 cm)Stille Osteotome is crafted for use in neurosurgical procedures that require cutting or chiseling through bones. This osteotome features a chisel tip that can be used to scrape or sculpt bone. Additionally on the opposite end of the chisel affixed to the handle is a wide blunt end that can be hammered on to drive the chisel into bone. This instrument is available in eleven different widths ranging from 4.0 mm to 25.0 mm making it well suited for use in wide ranging procedures that require small modifications to skull bone or cuts through entire vertebrae.
Lambotte Osteotome – W/Out Calibration Lines
SKU:
TT-SI-2619
w/ out calibration lines, 9" (23.0 cm)Lambotte Osteotome is specifically designed for uses such a bone cutting. This instrument is a flat metal piece that tapers on one end and is slightly curved out of the plane of the handle. Osteotomes have the added benefit of being operated manually and thus the pressure can be adjusted readily as cuts are created and continued through bone. Additionally this osteotome does not have calibration lines. It is available in a vast array of sizes ranging form 4.0 mm to 50 mm and in either a straight or curved profile making them well suited for a wide array of surgical scenarios and surgeon preferences.
Lambotte Osteotome – W/ Calibration Lines
SKU:
TT-SI-3516
w/ calibration lines, 7-1/4" (18.4 cm)Lambotte Osteotome is designed for use in neurosurgical procedures that require manipulation of bone. This instrument is designed to be used manually to cut through bone. It offers many advantages over drills or mechanical tools such as increased sensitivity to adjust the level of force. Additionally this osteotome has the added benefit of featuring calibration lines. This osteotome is available in twelve widths in a straight profile as well as two widths in a curve profile. A full set of ten featuring straight and curved profiles is also available.
U.S. Army Pattern Gouges
SKU:
TT-SI-7799
6-1/4" (16.0 cm)Â US Army Pattern Gouge is a specialized instrument designed for removal of specific segments of bone. This gouge is designed similarly to a chisel but the blade portion features a curvature to it allowing it to be used to scoop up segments. The opposite end of this gouge has a rounded, flat end that can be used with a mallet to increase the driving force to effectively pierce through bone. This gouge is available in three sizes 6.0 mm, 12.0 mm and 18.0 mm making them well suited for larger bones in the spinal surgery and smaller ones for more delicate work on the skull.
Cobb Osteotome
SKU:
TT-SI-6441
11" (28.0 cm)Cobb Osteotome is ideally suited for use in neurosurgical procedures such as craniotomies. This osteotome can be used to do things such as create a window in the skull to allow access inside or to scrape or carve away at bone to reshape it. Additionally this instrument features a large, cylindrical handle with micro-serrations for added griping as well as a neck piece from which the blade extends making it firmly built. This instrument is available in seven sizes ranging from 6.0 mm to 32.0 mm and in either a curved or straight profile making it well suited for a number of diverse patient needs and surgeon preferences.
Shoulder Penetration Gouge
SKU:
TT-SI-2878
3.0 mm, 8-1/2" (22.0 cm)Â Shoulder Penetration Gouge is a specialized instrument crafted for use in surgical procedures of the shoulder. This tool is made to penetration the shoulder for increased access. Additionally it measures 8.5" long and 3.0 mm and is crafted from premium German operating grade stainless steel making it a durable and long lasting instrument.
Reviews
There are no reviews yet.