Name | Cherry Osteotome |
Lead Time | Lead time advised within 48 hours of order placement. |
Specialty | Neuro, Ortho & Spine-Osteotomes |
Material Finish | Stainless Steel |
Grade | Premium Operating Room |
Units of Measurement | Each |
Manufacturer | Tool Tectra |
Sterility | Non-Sterile |
Usage | Reusable |
Cherry Osteotome
octagonal handle, 8″ (20.0 cm)Â Cherry Osteotome is designed for use in cutting and preparation of bone in neurosurgical procedures. This osteotome has a long, slender profile as well as a uniquely designed octagonal handle which allows it to be gripped and maneuvered easily. Additionally this osteotome is available in five widths 3.0, 4.0, 5.0, 6.0 and 7.0 mm and in either a straight or curved profile making it suitable for a wide variety of patient needs and surgical approaches.
SKU:
TT-SI-6726
Category: Osteotomes Chisels & Gouges
Description
Reviews (0)
Be the first to review “Cherry Osteotome” Cancel reply
Shipping & Delivery
Related products
Dawson-Yuhl Gouge
SKU:
TT-SI-3471
7.0 mm, 11" (28.0 cm)Â Dawson- Yuhl Gouge is specially crafted for delicate work in bone manipulation. It features a 7 mm gouge that can be used to scrape along bone or with a mallet be used to create holes or splinter bone to gain access to the inside. Uniquely this instrument is available in two different styles, straight or bayonet, allowing the perfect fit for any particular surgical maneuver.
Hoke Osteotome
SKU:
TT-SI-8377
5-1/2" (14.0 cm)Â Hoke Osteotome is crafted for preparation and cutting of bone during neurosurgery. This instrument features a sturdy handle for ease in handling which then narrows at the neck and widens again into a blade. One potential use of this osteotome is to saw through the skull to increase access during surgery such as craniotomy. Additionally this instrument can be used to reshape bony areas. This osteotome is available in either a curved or straight profile in size sizes ranging from 3.0 mm to 16.0 mm making this a highly versatile instrument suitable for a number of surgical procedures.
Lambotte Osteotome – W/ Calibration Lines
SKU:
TT-SI-3516
w/ calibration lines, 7-1/4" (18.4 cm)Lambotte Osteotome is designed for use in neurosurgical procedures that require manipulation of bone. This instrument is designed to be used manually to cut through bone. It offers many advantages over drills or mechanical tools such as increased sensitivity to adjust the level of force. Additionally this osteotome has the added benefit of featuring calibration lines. This osteotome is available in twelve widths in a straight profile as well as two widths in a curve profile. A full set of ten featuring straight and curved profiles is also available.
Mini-Lambotte Osteotome
SKU:
TT-SI-9143
swiss pattern, 5-1/8" (13.0 cm)Â Mini-Lambotte Osteotome is an instrument designed for use in cutting bone. This osteotome is crafted with a Swiss pattern. Osteotome offer significant advantages over drilling because they do not generate heat which can be damaging and also offer an increased level of tactile sensation. This instrument is available in a straight profile at twelve different lengths from 2.0 mm to 24.0 mm in 2 mm increments or in a set of nine. This instrument is also available in a curved profile in seven different lengths from 2.0 to 14.0 mm in 2 mm increments.
Smith-Petersen Gouge
SKU:
TT-SI-9221
8" (20.0 cm)Â Smith Peterson Gouge is crafted for use in surgical procedures that require manipulation of bone such as scooping or creating a hole. This instrument can be used to increase access to the central soft tissue portion of the bone or in prepping bones from grafting. Uniquely this gouge features a rounded handle that increases gripping and allowing for firm handling and maneuverability. Additionally this instrument is available in either a straight or curved pattern and in seven sizes ranging in width from 6.0 mm to 30.00.
McCulloch Osteotome
SKU:
TT-SI-3782
8-1/2" (22.0 cm)Â McCulloch Osteotome is an instrument very similar to a bone chisel. This osteotome can be used in many different neurosurgical and orthopedic type surgical interventions that require manipulation of bone. It features a slim handle and a further flattened body that ends in a chisel type point that allows for scooping or scraping of the bone for a variety of reasons including increasing access and visualization to the surgical field. Additionally this osteotome is available in either 4.0 mm width or 6.0 mm width making it suitable for a vast array of surgical procedures.
Hibbs Chisel
SKU:
TT-SI-4383
9-1/2" (24.0 cm)Â Hibbs Chisel is designed to scrape away and through bone to allow access to the surgical field. This chisel is designed to cleanly and effectively make cuts in bone without causing splintering and damage to surrounding areas. This instrument features a strong geometric shaped handle that tapers into a narrow neck and widens again to create a chisel head. The chisel also features a sharpened end for increased effectiveness in bone manipulation. This instrument is available in ten different sizes ranging from 6.0 mm to 38.0 mm making it well suited for use in small delicate areas as well as in larger bony areas.
Cobb Spinal Gouge
SKU:
TT-SI-7235
hexagonal handle, 9-1/2" (24.1 cm)Â Cobb Spinal Gouge is a specially crafted instrument for use in spinal surgeries. This instrument features a solidly designed hexagonal handle which gives adequate area for gripping. The gouge is designed to be used in the close spaces of the vertebral canal and other areas encountered in spinal surgery to make holes or to scrape away at bone. It is available in four different styles: straight, medium curve, strong curve and reverse curve making it well suited for a vast array of surgical scenarios and satisfy any surgeon preference.
Reviews
There are no reviews yet.