| Name | Smillie Knee Retractor – Curved |
| Lead Time | Lead time advised within 48 hours of order placement. |
| Competitor | ;BT425R;OS4043;225434;225-434;775610;77-5610;7756-10;775611;77-5611;7756-11;7756-10_7756-11; |
| Specialty | Neuro, Ortho & Spine-Retractors |
| Material Finish | Stainless Steel |
| Grade | Premium Operating Room |
| Units of Measurement | Each |
| Manufacturer | Tool Tectra |
| Sterility | Non-Sterile |
| Usage | Reusable |
Smillie Knee Retractor – Curved
curved, 5-1/2″ (14.0 cm)Â Smillie Knee Retractor is ideally suited for use in retraction of soft tissue surrounding the knee. This can be useful in total knee surgery that require the entire bony area to be exposed. This retractor features a t-shaped end from which extends a neck and body and a head that is set at an angle and features a flat, blunt blade that has a curve. Additionally is available in three different sizes making it able to accommodate a variety of surgical scenarios and patient needs.
Description
Reviews (0)
Shipping & Delivery
Related products
Beckmann Laminectomy Retractor
SKU:
TT-SI-7633
hinged arms, 4x4 sharp prongs, 17.0 mm deep, 12-1/8" (31.0 cm)Beckman Laminectomy Retractor is made for use in neurosurgical procedures of the spinal cord. Specifically this retractor can be used in laminectomy procedures in which the lamina of the vertebrate is removed. This retractor can be used to push aside the muscle and soft tissue layers that lie directly above the spinal cord. The ring handles and ratcheting mechanism make it easy to operate manually and to lock into the appropriate width. Additionally this retractor has sharp prongs and hinged arms to keep a firm grip on the tissue it is retracting.
Adson Dura & Nerve Hook
SKU:
TT-SI-6258
3.0 mm tip, 8" (20.0 cm)Â Adson Dura & Nerve Hook is crafted for use in a wide variety or neurosurgical procedures. This hook is a multipurpose instrument that can be used to retract nerves but can also be used to retract the dural layer of the meninges during craniotomies and spinal surgeries. Additionally this instrument is available with either a sharp or blunt tip making it suited for retraction of very delicate tissue matter with the blunt tip or less sensitive tissue with the sharp tip.
Blade Ejector Forceps
SKU:
TT-SI-7325
for changing blades w/ ball snap system, 4-1/2" (11.5 cm) Blade Ejector Forceps are crafted for use along side a variety of different blades. It is ideally suited for changing blades with a ball snap system, all of which are also available by Surgical. These forceps are hand-crafted by certified instrument makers to conform to the highest standards in instrumentation. This instrument is a valuable addition to any surgical repertoire specifically in quickly and effectively changing blades.
Cervical Retractor Fenestrated Blade
SKU:
TT-SI-5969
stainless steel, ball snap closure, bluntCervical Retractor Fenestrated Blade is an added component to be used alongside the cervical retractor for general purpose soft tissue retraction. Both blades are made from stainless steel and a ball snap closure making them a tight fit. Each blade also features a blunt edge to prevent trauma and tearing during retraction and the fenestrations increase the surface area over which the pressure is distributed. They are available in variety of sizes and curvatures making it possible to find a suitable blade for soft tissue retraction in a number of neurosurgical scenarios and approaches to the spinal cord.
Caspar Nerve Root Retractor
SKU:
TT-SI-1255
9-1/2" (24.0 cm)Â Caspar Nerve Root Retractor is an instrument specially made for use in neurosurgical procedures. More specifically this is used in nerve root retraction in procedures such as lumbar discectomy. The retractor blade comes in a variety of widths including: 6.0 mm, 8.0 mm and 10.0 mm making it a highly versatile retractor that can apply a varied amount of pressure depending on the circumstance.
Cervical Retractor
SKU:
TT-SI-1492
9.0 cm spread, hinged frameCervical Retractor is ideally suited for use in retractor of soft tissue and muscle layers in neurosurgical spinal procedures. This instrument can be used at the cervical spinal level in procedures such as laminectomies or hemilaminectomies. Additionally it is available with either a rigid frame or a hinged frame making it more effective at fitting into a variety of different sized patients and opens to a spread of 9.0 cm giving clear access to the surgical field.
Cervical Retractor Longitudinal Blade
SKU:
TT-SI-9364
stainless steel, ball snap closure, blunt Cervical Retractor Longitudinal Blade is an added component to be used alongside the cervical retractor for longitudinal retraction. All five blades are made from stainless steel and a ball snap closure making them a tight fit. Each blade also features a blunt edge to prevent trauma and tearing during retraction. They are available in variety of sizes and curvature making it possible to find a suitable blade for soft tissue retraction in a number of neurosurgical scenarios and approaches to the spinal cord.
Campbell Nerve Retractor
SKU:
TT-SI-2539
10.5 mm wide blade, 8-7/8" (22.5 cm)Â Campbell Nerve Retractor is specially designed for use in neurosurgical and other procedures that require manipulation and retraction of nerves. This retractor features a ribbed handle from which extends a slightly curved neck and a retraction blade. The slightly sloping the neck gives this an ideal contour for use in the spinal surgery or in craniotomies.
Reviews
There are no reviews yet.