Name | Caspar Type Counter-Retractor |
Lead Time | Lead time advised within 48 hours of order placement. |
Specialty | Neuro, Ortho & Spine-Retractors |
Material Finish | Stainless Steel |
Grade | Premium Operating Room |
Units of Measurement | Each |
Manufacturer | Tool Tectra |
Sterility | Non-Sterile |
Usage | Reusable |
Caspar Type Counter-Retractor
Caspar Type Counter-Retractor is a specialized instrument made for retraction of soft tissue during neurosurgical procedures. This retractor is available as a frame with six different blades ranging from 35.0 mm to 60.0 mm in 5.0 mm increments. The variety of sizes of blades allows this retractor to be suitable for many different patients and surgeon preferences.
SKU:
TT-SI-8931
Category: Hooks & Retractors
Description
Reviews (0)
Be the first to review “Caspar Type Counter-Retractor” Cancel reply
Shipping & Delivery
Related products
Blount Knee Retractor
SKU:
TT-SI-9471
6.0 mm distal tip, 7" (17.5 cm)Â Blount Knee Retractor is a specialized instrument that is made for use in arthroplasty surgeries. The long narrow portion of this can be slid above the capsular ligament at the joint. It can also be fit around knee implants and thus is suitable for use in knee revision.
Adson Laminectomy Retractor
SKU:
TT-SI-7587
hinged arms, 4x5 blunt prongs, 1-1/8" (2.80 cm), 12-1/8" (31.0 cm)Adson Laminectomy Retractor is ideally suited for use in retraction of muscle and soft tissue layers during laminectomy procedures. This procedure removes the lamina, a portion of the vertebrae, and it is necessary to have full access to the vertebrae in question. This retractor features ring handles for ease in handling as well as hinged arms and blunt prongs that provide a gentle but secure hold on the tissue.
Bennett Bone Retractor
SKU:
TT-SI-5482
9-1/2" (24.1 cm)Â Bennett Bone Retractor is designed for use in retraction of bone during surgical intervention. It features a large handle that features a rounded tip for ease in handling. Additionally the functional portion of this instrument has a flat neck that is at a slight angle and flares out and makes a distinctive leaf shape that is also rounded at its tip. The head of this piece is available in two widths 45.0 mm and 65.0 mm making it versatile enough for small and large bones.
Adson Cerebellar Retractor
SKU:
TT-SI-3676
7-1/2" (19.0 cm), 22.0 mm deep Adson Cerebellar Retractor is a specialized instrument that is used in neurosurgical procedures. This tool can be used for retraction of the cerebellum, it is protected from damage by placement of cotton strips. There is a ratcheting mechanism that allows the ring handles to be locked at a certain width and held there. Additionally this retractor is available with either straight or angled arms and either sharp or blunt prongs makes this a highly versatile instrument that can satisfy any particular surgeon preference of patient need.
Caspar Nerve Root Retractor
SKU:
TT-SI-1255
9-1/2" (24.0 cm)Â Caspar Nerve Root Retractor is an instrument specially made for use in neurosurgical procedures. More specifically this is used in nerve root retraction in procedures such as lumbar discectomy. The retractor blade comes in a variety of widths including: 6.0 mm, 8.0 mm and 10.0 mm making it a highly versatile retractor that can apply a varied amount of pressure depending on the circumstance.
Cervical Retractor
SKU:
TT-SI-1492
9.0 cm spread, hinged frameCervical Retractor is ideally suited for use in retractor of soft tissue and muscle layers in neurosurgical spinal procedures. This instrument can be used at the cervical spinal level in procedures such as laminectomies or hemilaminectomies. Additionally it is available with either a rigid frame or a hinged frame making it more effective at fitting into a variety of different sized patients and opens to a spread of 9.0 cm giving clear access to the surgical field.
Blount Retractor
SKU:
TT-SI-5734
10" (25.0 cm)Blount Retractor is a general-purpose retractor that can be used in orthopedic surgeries. It is designed with a very flat design allowing it to effectively retract and evenly distribute the pressure being applied while keeping itself out of the surgical field. Additionally it is made with either a single or a double prong making it a highly versatile instrument that can be satisfy a variety of patient needs and surgeon preferences.
Beckmann-Eaton Laminectomy Retractor
SKU:
TT-SI-7592
hinged arms, 7x7 prongs, 12-1/2" (32.0 cm)Â Beckmann-Eaton Laminectomy Retractor is designed for use in neurosurgical laminectomy procedures. In order to perform this procedure the soft tissue and muscle layer directly atop of the spinal need to be incised through and retracted. This instrument features hinged arms and 7x7 prongs that allow gentle but effective retraction that gives direct access to the surgical field. This retractor is available either with either sharp or blunt prongs making it a versatile instrument to satisfy any patient need or surgeon preference.
Reviews
There are no reviews yet.