| Name | Cushing Perforating Drill |
| Lead Time | Lead time advised within 48 hours of order placement. |
| Specialty | Neuro, Ortho & Spine-Cranial Drills |
| Material Finish | Stainless Steel |
| Grade | Premium Operating Room |
| Units of Measurement | Each |
| Manufacturer | Tool Tectra |
| Sterility | Non-Sterile |
| Usage | Reusable |
Cushing Perforating Drill
Cushing Perforating Drill
1/2″ (13.0 mm)
Cushing Perforating Drill is crafted for use in neurosurgical procedures. Specifically this drill can be used to access the brain through the skull in procedures such as craniectomies. This drill bit features a spatula like head that is 13.0 mm. It is designed to safely penetrate the bony layer to expose the surgical field that is located below without causing trauma to the delicate brain tissue.
Description
Reviews (0)
Shipping & Delivery
Related products
McKenzie Drill Bit
SKU:
TT-SI-6689
McKenzie Drill Bit
1/2" (13.0 mm)
McKenzie Drill bit is a unique instrument that can be used in conjunction with a drill to enlarge and create holes in bone. Specifically this can be useful in craniotomies and other neurosurgical procedures that require access through the bony skull to the soft underlying brain tissue. The head of this bit is similar to a typical spiral cut drill bit and easily penetrates bone.
Hudson Cranial Drill Set includes
SKU:
TT-SI-7113
Hudson Cranial Drill Set
includes: #5760-03 hudson brace; #5760-09 hudson burr, 10.0 mm diameter; #5760-14 hudson burr, 14.0 mm diameter; #5760-16 cushing burr, 16.0 mm diameter; #5760-22 hudson burr, 22.0 mm diameter; #5764-07 hudson cerebellar extension
Hudson Cranial Drill Set is an instrument specifically deigned for use in neurosurgical procedures. Procedures such as craniotomies require access through the hard skull layer to the softer underlying brain tissue. This set includes a Hudson brace, 1 Hudson burr with a 10 mm, 14 mm and 22 mm diameter, a cushing burr at 16 mm diameter and a cerebellar extension. All of this instrumentation is inval
Moore Drill
SKU:
TT-SI-7537
Moore DrillMoore Drill is ideally suited for use in creating holes or expanding already made holes in bone such as in the skull or other bony parts of the body. These holes can be used for increased access to underlying tissue such as in craniotomies or in areas such as the arm or leg to create access for pins or wires. A unique aspect of this instrument is that it is handheld and can be cranked manually. This is available as a complete set including a drill and two bits or each portion is available individually.
Bunnell Drill
SKU:
TT-SI-9259
Bunnell Drill
cannulated, 3 jaw stainless steel chuck, accepts wires & pins up to 5/32" (4.0 mm), aluminum body Bunnell Drill is a specialized instrument used for drilling through bone in neurosurgical and orthopedic procedures. This instrument is cannulated and features stainless steel chuck. This drill is uniquely designed with a hollow design that allow for wires and pins to pass through it up to a diameter of 4.0 cm. Additionally this drill is designed with an aluminum body and comes in a design that features a chuck key.
Cushing Burr
SKU:
TT-SI-6285
Cushing Burr
5/8" (16.0 mm)
Cushing Burr is ideally suited for use in neurosurgical procedures specifically of the brain. A drill can be used to start a pilot hole which can then be further enlarged via use of a burr. This instrument can be used in procedures such as craniotomies which require access through the bony skull down to the softer brain tissue. Additionally this burr is slightly spherical shaped and is 16.0 mm.
Ralks Drill
SKU:
TT-SI-8931
Ralks Drill
cannulated, 3 jaw stainless steel chuck, accepts wires & pins up to 1/4" (6.3 mm), aluminum body Ralks Drill is designed for use in penetration of bone in a variety of procedures orthopedic and neurosurgical. This drill features an aluminum body which makes it lightweight and easy to manipulate without causing strain or fatigue. Additionally it is canulated and features a 3 jaw stainless steel chuck. The cannulated design allows for wires and pins up to 6.3 mm to be threaded through it. This instrument is available as a drill and chuck key or just with the chuck key only.
Hudson Burr
SKU:
TT-SI-3147
Hudson Burr - 3/8"
3/8" (10.0 mm)
Surgical's Hudson Burr is ideally suited for use in neurosurgical procedures specifically of the brain. A drill can be used to start a pilot hole which can then be further enlarged via use of a burr. This instrument can e used in procedures such as craniotomies which require access through the bony skull down to the softer brain tissue. This instrument features a 10.0 mm diameter.
Hudson Burr
SKU:
TT-SI-3772
Hudson Burr - 9/16"
9/16" (14.0 mm)
Hudson Burr is ideally suited for use in neurosurgical procedures specifically of the brain. A drill can be used to start a pilot hole which can then be further enlarged via use of a burr. This instrument can e used in procedures such as craniotomies which require access through the bony skull down to the softer brain tissue. This instrument features a 14.0 mm diameter.
Reviews
There are no reviews yet.