Name | Larsen Tendon Forceps |
Lead Time | Lead time advised within 48 hours of order placement. |
Competitor | ;PM4222;PM-4222;7815-02;PM4224;PM-4224;7815-03;PM4225;PM-4225;7815-05;7815-02_7815-05; |
Specialty | Neuro, Ortho & Spine-Cartilage & Tendon Instruments |
Material Finish | Stainless Steel |
Grade | Premium Operating Room |
Units of Measurement | Each |
Manufacturer | Tool Tectra |
Sterility | Non-Sterile |
Usage | Reusable |
Larsen Tendon Forceps
Larsen Tendon Forceps
4″ (10.2 cm)
Larsen Tendon Forceps are a specialized instrument made for use in orthopedic surgeries. These forceps have a tweezer profile that features a ribbed middle section that allows for effective gripping and maintenance of hold. Additionally at the end each of the prongs is a crescent shaped jaw area that can be used to fit around the circumference of a tendon and grip it most effectively. These forceps are available in three widths 2.0 mm, 4.0 mm and 5.0 mm making it highly versatile and useful in a variety of tendon surgeries ranging from the Achilles to the tendons of the hand.
SKU:
TT-SI-4695
Category: Cartilage & Tendon Instruments
Description
Reviews (0)
Be the first to review “Larsen Tendon Forceps” Cancel reply
Shipping & Delivery
Related products
Bunnell Tendon Passer & Probe
SKU:
TT-SI-3733
Bunnell Tendon Passer & Probe
malleable, 5.0 mm diameter
Bunnell Tendon Passer and Probe is a versatile instrument ideally suited for use in orthopedic surgical procedures. It is a malleable instrument that is designed to deliver tendons to the area where they are needed. This can be useful in procedures such as repair of tendons in the hand in which it is necessary to guide the tendon through the lumbrical canal and navigate other crucial areas with the tendon. This instrument doubles as a probe and can be used in general exploration of areas before using it to guide a tendon. This instrument is available in either 7.25" or 9" making it suitable for a variety of patient needs and surgeon preferences.
Brand Tendon Grasping Forceps
SKU:
TT-SI-5556
Brand Tendon Grasping Forceps
7" (17.8 cm)
Brand Tendon Grasping Forceps are ideally suited for use in surgeries of the tendon. Procedures such as patellar tendon repair or a tendon graft in any other area of the body. This instrument features ring handles that allow for ease in manual operation. It also features a ratchet mechanism that can be set at particular widths to aid in grasping and keeping hold of a tendon so that it can be manipulating without losing grip.
Fischer Tendon Stripper
SKU:
TT-SI-9468
Fischer Tendon Stripper
round, 4.0 mm inner diameter, 12-1/8" (31.0 cm)
Fischer Tendon Stripper is a unique instrument ideally suited for use in procedures that require modification of the diameter of a tendon. This can be used in surgeries such a repair and reconstruction of the anterior cruciate ligament or the plantaris tendon. This instrument can be pushed up the tendon in quick motions while the tendon itself is kept taut to resize it. Additionally this instrument has a round opening and a 4.0 mm diameter as well as a ribbed grip that allows optimal hold.
Tendon Passer
SKU:
TT-SI-1557
Tendon Passer
pointed tip, 6" (15.0 cm)
Tendon Passer is a unique instrument designed for the handling of tendons in a variety of surgical procedures. It is ideally suited for procedures such as repair of the flexor tendon to successfully move the proximal stump of the tendon to the finger or in many other tendon repair procedures such as of the patella. Additionally this instrument features a pointed tip that allows it to be used in general dissection to reach the specific area where the tendon or fragment of tendon is located. This passer is available in either a straight or curved profile making it suitable for a vast array of orthopedic procedures.
Kleinert-Kutz Tendon Retriever
SKU:
TT-SI-2715
Kleinert-Kutz Tendon Retriever
flexible serrated jaws w/ 1x2 teeth, shaft length of 5-1/8" (13.0 cm)
Kleiner-Kutz Tendon Retriever is a uniquely designed instrument for use in grasping tendons from a distance and moving them or pulling them through an already made incisions. This instrument features a shaft that is 5 1/8 " long that is very slim making it able to fit through very small areas. Additionally the jaws are flexible and serrated with 1x2 teeth that allows it to clamp onto tissue areas as they are manipulated without causing damage but effectively keeping them within its hold. This instrument is available in two sizes: small with a shaft diameter of 2.0 cm and large with a shaft diameter of 2.5 mm.
Hoen Grasping Forceps
SKU:
TT-SI-5279
Hoen Grasping Forceps
serrated, 1x2 teeth, 5-1/2" (14.0 cm)
Hoen Grasping Forceps are a uniquely designed instrument that can be used in a variety of surgical procedures. This instrument has jaws that are set at an angle to the ring handles that allows the jaws to be parallel to the body or site of grasping while the handle is able to remain comfortably out of the field of surgery. The jaws of these forceps are serrated and feature 1x2 teeth which further aids in their ability to grasp many different tissue layers and surfaces.
Bunnell Tendon Stripper
SKU:
TT-SI-9565
Bunnell Tendon Stripper
round, 6" (15.0 cm)
Bunnell Tendon Stripper is a specialized instrument crafted for use in orthopedic surgical procedures. This instrument is designed to strip down or whittle down tendons to an appropriate size. This can be useful in tendon graft procedures or in other surgical interventions of the tendons that require for the diameter of it to be stepped down. Additionally this instrument is available in a range of sizes from 2.0 – 7.0 mm diameter making it adequate for any patient need or surgeon preference.
Martin Cartilage Clamp
SKU:
TT-SI-5241
Martin Cartilage Clamp Martin Cartilage Clamp is a highly versatile instrument that can be used in variety of orthopedic procedures. Specifically it is designed to be used with cartilage and thus is more gentle than something crafted for use with bone. This clamp is ideal for procedures such as meniscus repair and other surgical repairs of torn cartilage. The ring handle grip as well as the zig-zag design of the teeth making this instrument easy to manipulate manually while keeping a sturdy grip on the cartilage. Additionally it is available in three lengths: 6.25", 7.25" and 8".
Reviews
There are no reviews yet.