Name | Bishop Bone Holding Forceps |
Lead Time | Lead time advised within 48 hours of order placement. |
Specialty | Neuro, Ortho & Spine-Bone Holding Forceps |
Material Finish | Stainless Steel |
Grade | Premium Operating Room |
Units of Measurement | Each |
Manufacturer | Tool Tectra |
Sterility | Non-Sterile |
Usage | Reusable |
Bishop Bone Holding Forceps
Bishop Bone Holding Forceps
adjustable jaw
Bishop Bone Holding Forceps are ideally suited for use in orthopedic surgical procedures. This instrument is uniquely designed for procedures such as fracture repair or bone reduction that require a firm grasps on a bone in a particular orientation. It aids in alignment of bone segments through a procedures without slipping or movement to ensure accuracy. Additionally these forceps feature and adjustable jaw that gives it increased versatility making it suitable to almost any surgical scenario.
SKU:
TT-SI-4774
Categories: Bone Holding Forceps, Neuro & Ortho
Description
Reviews (0)
Be the first to review “Bishop Bone Holding Forceps” Cancel reply
Shipping & Delivery
Related products
Bone Reduction Forceps
SKU:
TT-SI-9527
Bone Reduction Forceps - Curved Jaws, Speed Lock
curved jaws, speed lock
Bone Reduction Forceps are specially designed for use in surgeries that require manipulation of bone. Specifically these forceps features a curved jaw with some serrations that make it well suited for use in gripping bone. They can aid in approximation of bones in setting and alignment of fractures as well as any other manipulation of bone that require a firm grasp and hold. Additionally these forceps have a speed lock and is available in either 7" or 9" to satisfy any particular patient need or surgeon preference.
Bone Holding Forceps
SKU:
TT-SI-7557
Bone Holding Forceps
delicate, straight, 2x2 teeth, 5.0 mm wide, 7-7/8" (20.0 cm)
Bone Holding Forceps are a general purpose instrument that can be used in many different surgical procedures that require manipulation of bone. These forceps are specifically designed for use in handling delicate bones such as smaller phalangeal and metacarpal bones that require a small circumference tool. Additionally it features 2x2 teeth that allow it to effectively grip the bone without causing puncture to the bone itself.
Distraction Screws
SKU:
TT-SI-5632
Distraction Screws
package of 5Distraction Screws are an accessory that is usually used alongside distractors or a distraction screwdriver that is spec. These screws are ideally suited for use in spinal surgeries specifically in minimally invasive procedures. These instruments are designed to distract disc space to allow a clearer view of the surgical field to ensure adequate space for the surgeon to perform the spinal surgery. These screws are available in three sizes 14.0 mm, 16.0 mm and 18.0 mm in a package of 5.
Bone Graft Holder (Caspar Type)
SKU:
TT-SI-8815
8.0 mm x 15.0 mm tip, 21.0 cm
Capsar Type Bone Graft Holder is ideally suited for use in orthopedic type procedures that require the use of a bone graft. This instrument is made to hold and handle the bone graft until it is inserted into the area where it is necessary and secured into place. This holder features a large rounded handle from which extends a body that ends in a mechanism for grasping the bone graft. This instrument features a 8.0 mm x 15.0 mm tip
Bone Clamp
SKU:
TT-SI-5975
Bone Clamp
curved, extra long ratchet, 5-3/4" (14.5 cm)
Bone Clamp is a versatile surgical instrument that can be used in a vast array of surgeries. It can be used in seismoidectomy procedures to grasp the small sesamoid bone or it can be used in simple grasping of long bones to aid in alignment. It features curve blades that allow it to dip into the surgical field while allowing the handle of the instrument to remain out of the surgical field. Additionally this clamp features an extra long ratchet that further increases its versatile and widths it can be set at.
Vertebral Body Dissector (Caspar Type)
SKU:
TT-SI-7376
Vertebral Body Dissector (Caspar Type)Caspar Type Vertebral Body Dissector is ideally suited for use in neurosurgical procedures of the spine. A dissector is designed to be inserted between the vertebral bodies to increase the space between two adjacent vertebrae. This increase in space allows for the surgeon to see the surgical field more clearly and also gives adequate space for the procedure to be performed. This dissector is available in small or large making it an adequate fit for a variety of patient needs and surgeon preferences.
Depth Gauge
SKU:
TT-SI-6673
Depth Gauge Depth Gauge is designed for use in a variety of situations, specifically those in which holes are drilled into bone. This gauge can be used to measure the depth of holes that have been drilled such a initial pilot holes or burr holes in surgeries such as craniotomies. This instrument can be used to precisely make holes that are the specific depth that is needed to expose the surgical field without causing undue damage to the surrounding area. This gauge is available in two sizes: small at 13.0 cm and large at 21.3 cm making it suitable for a variety of different surgical scenarios.
Bone Graft Impactor (Caspar Type)
SKU:
TT-SI-2524
Bone Graft Impactor (Caspar Type)
graduated 1/4" to 1-1/4", shaft 6-1/4" (16.0 cm)Bone Graft Impactor is of the Casper type and is a multi-purpose instrument that can be used in a variety of orthopedic procedures. Specifically it is designed for use in bone grafting procedures to ensure that the graft is properly settled into place. It features a handle from which the tapering body extends ending in a small circular head perfect for setting on the graft and applying force. This instrument is graduated ¼" to 1 ¼" and features a shaft of 6 ¼". This instrument is available in three sizes 3.0 mm, 5.0 mm and 8.0 mm.
Reviews
There are no reviews yet.