| Name | Bone Graft Holder (Caspar Type) |
| Lead Time | Lead time advised within 48 hours of order placement. |
| Specialty | Neuro, Ortho & Spine-Anterior Cervical Fusion Instruments |
| Material Finish | Stainless Steel/Plastic |
| Grade | Premium Operating Room |
| Units of Measurement | Each |
| Manufacturer | Tool Tectra |
| Sterility | Non-Sterile |
| Usage | Reusable |
Bone Graft Holder (Caspar Type)
8.0 mm x 15.0 mm tip, 21.0 cm
Capsar Type Bone Graft Holder is ideally suited for use in orthopedic type procedures that require the use of a bone graft. This instrument is made to hold and handle the bone graft until it is inserted into the area where it is necessary and secured into place. This holder features a large rounded handle from which extends a body that ends in a mechanism for grasping the bone graft. This instrument features a 8.0 mm x 15.0 mm tip
Description
Reviews (0)
Shipping & Delivery
Related products
Bone Reduction Forceps
SKU:
TT-SI-7591
Bone Reduction Forceps - 2" Ratchet
2" ratchet allows opening jaws to 4", 8" (20.0 cm)
Bone Reduction Forceps are an ideal addition to any operating procedures. These forceps are crafted for use in grasping bone to aid in realignment and setting of fractures and breaks. The most unique aspect of this particular instrument is that it features a 2" ratchet which allows the jaws to open to 4" making it able to fit a vast array of surgical scenarios where other instrumentation would not suffice.
Vertebral Body Dissector (Caspar Type)
SKU:
TT-SI-7376
Vertebral Body Dissector (Caspar Type)Caspar Type Vertebral Body Dissector is ideally suited for use in neurosurgical procedures of the spine. A dissector is designed to be inserted between the vertebral bodies to increase the space between two adjacent vertebrae. This increase in space allows for the surgeon to see the surgical field more clearly and also gives adequate space for the procedure to be performed. This dissector is available in small or large making it an adequate fit for a variety of patient needs and surgeon preferences.
Depth Gauge
SKU:
TT-SI-6673
Depth Gauge Depth Gauge is designed for use in a variety of situations, specifically those in which holes are drilled into bone. This gauge can be used to measure the depth of holes that have been drilled such a initial pilot holes or burr holes in surgeries such as craniotomies. This instrument can be used to precisely make holes that are the specific depth that is needed to expose the surgical field without causing undue damage to the surrounding area. This gauge is available in two sizes: small at 13.0 cm and large at 21.3 cm making it suitable for a variety of different surgical scenarios.
Bone Clamp
SKU:
TT-SI-5975
Bone Clamp
curved, extra long ratchet, 5-3/4" (14.5 cm)
Bone Clamp is a versatile surgical instrument that can be used in a vast array of surgeries. It can be used in seismoidectomy procedures to grasp the small sesamoid bone or it can be used in simple grasping of long bones to aid in alignment. It features curve blades that allow it to dip into the surgical field while allowing the handle of the instrument to remain out of the surgical field. Additionally this clamp features an extra long ratchet that further increases its versatile and widths it can be set at.
Twist Drill
SKU:
TT-SI-1744
Twist Drill
drilling depth 8.0 mm, length 5-3/4" (14.6 cm)
Twist Drill is a unique drilling instrument designed to create new holes to increase access to certain areas such as through the skull to the brain tissue. This instrument is crafted to distribute the force from the center of the drill point out and thus is ideal in creating new holes without the use of pilot holes. A variety of surgeries including craniotomies can benefit from a specialized drill such as this one. Additionally this instrument has a drilling depth of 8.0 mm and a length of 14.6 cm.
Bone Holding Forceps
SKU:
TT-SI-7557
Bone Holding Forceps
delicate, straight, 2x2 teeth, 5.0 mm wide, 7-7/8" (20.0 cm)
Bone Holding Forceps are a general purpose instrument that can be used in many different surgical procedures that require manipulation of bone. These forceps are specifically designed for use in handling delicate bones such as smaller phalangeal and metacarpal bones that require a small circumference tool. Additionally it features 2x2 teeth that allow it to effectively grip the bone without causing puncture to the bone itself.
Bone Hook
SKU:
TT-SI-9131
Bone Hook
sharp, 7" (18.0 cm)Bone Hook is a highly versatile instrument that is ideally used in procedures that require manipulation and handling of bone. It features a sharp bone hook that allows it to effectively grip bones and move them into the desired position. Additionally the shape of this instrument lends it to use in retraction of bone and other hard tissue surfaces to increase access to the surgical field. This hook is available with a phenolic handle or stainless steel t-handle making it able to satisfy and surgeon preference.
Rowland-Ruskin Forceps
SKU:
TT-SI-8116
Rowland-Ruskin Forceps
double-action, narrow jaws, 7-1/8" (18.0 cm)Â Rowland-Ruskin Forceps are a unique designed instrument ideally suited for use in a number of different procedures that require clipping of small bones. These forceps features a spring handle as well as double-action, narrow jaws. These are well suited for areas such as the orbit of the eye as well as bones in the nasal area. These forceps are available in two different profiles straight or curved making it well suited for access in a number of surgical scenarios.
Reviews
There are no reviews yet.